|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-12-2011, 06:45 PM | #1 |
Member
Join Date: Dec 2010
Posts: 38
|
37-38 Ford seat holes
Hi all, can someone help me with the measurements of the 37-38 Ford tudor front seat mounting hole dimensions. I am having Bob at Bengels seats make a seat for me and need those measurements.
Here are the measurements that he has for 40 and up, but I don't think that they are the same: 40 5/8" wide by 13 1/2" deep and those are square. Get back to me at either here, or at [email protected] Thanks.....Bill |
05-12-2011, 09:21 PM | #2 |
Senior Member
Join Date: May 2010
Location: Star, MS
Posts: 4,024
|
Re: 37-38 Ford seat holes
My '38 club coupe seat is in the car so I measured from center of bolt heads and got 36 1/4" wide and 10 1/4 front to back. I could be more precise without the seat bolted down, but I'm confident those measurements are correct.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-13-2012, 02:40 PM | #3 |
Member
Join Date: Apr 2012
Location: SoCal Diego
Posts: 30
|
Re: 37-38 Ford seat holes
Sponsored Links (Register now to hide all advertisements)
hemisedan Even though we don't have the upholstery on the springs, these almost bolted right into the original seat mount holes. The side panels worked out well, and all that I can say is these seats are a very good basis for for my project. Hopefully by Fall we'll see what these look like with leather on them. The compliments on this seat, and about the heavy duty nature of it, and that now the pleats can run all the way across the split seat back. Just thought that I'd tell you all what my experience in mounting this in the 38, and I am happy. Thanks for helping us out guys!
__________________
Don't take life to seriously, no one gets out alive. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|