Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 03-05-2023, 10:11 PM   #1
38convsedan
Senior Member
 
38convsedan's Avatar
 
Join Date: May 2022
Location: Lakeland Florida
Posts: 378
Default 1938 Deluxe w/8BA. Is stock 38 exhaust ok?

I’m running a 1950 8BA in my ‘38 with stock ‘38 manifolds and exhaust system. Is this system adequate for the 8BA? Can the ‘38 system handle exhaust volume from the 8BA?

As always, thank you in advance!
Steve

Last edited by 38convsedan; 03-06-2023 at 06:02 AM.
38convsedan is offline   Reply With Quote
Old 03-06-2023, 06:45 AM   #2
38 coupe
Senior Member
 
38 coupe's Avatar
 
Join Date: May 2010
Location: South Texas
Posts: 1,658
Default Re: 1938 Deluxe w/8BA. Is stock 38 exhaust ok?

It probably will be fine. The stock manifolds will be no problem at all. The stock tail pipe after the muffler gets noticeably smaller in diameter. I have been told the small tail pipe was there since the exhaust cooled off in the muffler making a larger pipe unnecessary. Most replacement systems use the same size pipe all the way to the back and should be fine with a 239 cubic inch engine. Mercury used the same type exhaust manifolds and pipes starting in 1939 with 239 cubic inch engines.
38 coupe is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 03-14-2023, 04:33 PM   #3
V8-m
Junior Member
 
V8-m's Avatar
 
Join Date: Feb 2023
Location: Europe
Posts: 11
Default Re: 1938 Deluxe w/8BA. Is stock 38 exhaust ok?

Sponsored Links (Register now to hide all advertisements)
It will be fine...there is more restrictions in the block itself than in exhaust.
V8-m is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 06:53 AM.