29 pickup door glass,also door handles

[bambooboy]

got trk 8 months ago, 90% done.have some new parts in boxes.has no glass in doors,have 1 bottom channel,need to order another when I get glass.in box have 2 new (door inner upright posts A-335)no holes for bolts ,screws.does this go in center of opening?also trk has new door skins,&door handles in box.the vendors sell machine bolts for handles,&don't show washer or nuts.assuming original had welded nut inside.question, stainless bolt&nut or stainless sheetmetal screws. thanks, tom in Joppa md

[Joe K]

Door glass is on the upper left of the following:

http://www.mafca.com/downloads/Servi...p250_Glass.jpg

Vince Falter at his excellent site provides guidance as to safety or tempered or plate glass and also guidance on thickness.

http://www.fordgarage.com/pages/glassdetails.htm

There are vendors online who sell completed glass even with the correct markings as indicated by Vince. Bring yer wallet though.

Other details you ask about you might want to take in order in separate questions. You're covering a LOT of ground here.

And you're making good progress with 90 percent done in 8 months. Pix help a lot. We all LOOOOVE pix, of course.

Joe K

[bambooboy]

thanks joe, but I bought it 90% done after owner passed --tom

[CC29Pickup]

I am restoring a 29 pickup as well. A lot of very useful info fond here. Lots of people with the knowledge to help you through it as well.

[bambooboy]

hey wisconson,on your 29 pickup,outside door handles.bolts ,side by side or top&bottom. I have new door skin on mine,& new door handles in a box. will prob try to bolt&nut. thanks tom in Joppa md

[Papa's CCPU]

Sponsored Links (Register now to hide all advertisements)

Will this help? No measurements....