|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-24-2017, 10:44 AM | #1 |
Senior Member
Join Date: May 2010
Posts: 961
|
Fitting '36 Car Hood......Help!!
Hi Guys-
I'm in the process of fitting up the hood on my '36 car project, and it seems to have a very large gap all along between the bottom edge of the hood sides and the fender. I have the proper lacing installed on the cowl and the grill, so the hood top is setting right. What should the gap be along the edges? I also posted this on the HAMB site as well. Thanks guys for any help you can give me on this. |
07-24-2017, 08:40 PM | #2 |
Senior Member
Join Date: May 2010
Location: Minnesota, USA
Posts: 138
|
Re: Fitting '36 Car Hood......Help!!
Sponsored Links (Register now to hide all advertisements)
The gap at the upper front of the hood against the hood ornament is usually the toughest area to deal with. |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|