Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 04-25-2023, 06:47 PM   #1
bucket-o-rust
Senior Member
 
Join Date: Aug 2012
Location: visalia calif
Posts: 263
Default 1930 roadster interior wood

I need help with the interior seat backrest wood support. The three pieces of wood that connect to the seat riser and the top piece of wood that connects to those three pieces and fits from side to side at the top. I have a new wood kit from Snyders but I can not make it fit correctly. Actually I do not know what is correct. Maybe someone who has an original roadster and restored his car recently can call me and guide me on how the wood was installed when my car was new. This is DON in Visalia California 559 786 0678
bucket-o-rust is offline   Reply With Quote
Old 04-26-2023, 10:58 AM   #2
rotorwrench
Senior Member
 
rotorwrench's Avatar
 
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
Default Re: 1930 roadster interior wood

Sponsored Links (Register now to hide all advertisements)
The Snyder's link in that previous post has enough photos to get an idea of how the wood and the package tray worked to hold the rear seat back. Just click on the link and look at the different photos, One photo there is pretty good.

https://www.snydersantiqueauto.com/p...d=977678&cat=0
rotorwrench is online now   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 09:42 AM.