|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-17-2011, 01:25 PM | #1 |
Senior Member
Join Date: Jul 2011
Posts: 146
|
29 Running Board Aprons
Are the running board aprons supposed to drain holes along the v grove where the back edge of the running board sits?
Thanks, Randy |
11-17-2011, 07:26 PM | #2 |
Senior Member
Join Date: May 2010
Location: Owls Head
Posts: 257
|
Re: 29 Running Board Aprons
Yes
__________________
Driving old Fords since 1947 |
Sponsored Links (Register now to hide all advertisements) |
|
11-18-2011, 10:55 AM | #3 |
Senior Member
Join Date: Jul 2011
Posts: 146
|
Re: 29 Running Board Aprons
Does anyone know how many and what the spacing should be?
|
11-18-2011, 11:16 AM | #4 |
Senior Member
Join Date: Jun 2010
Location: MN.
Posts: 253
|
Re: 29 Running Board Aprons
My '29 2-dr aprons have three holes. One is dead center at 22-inches. and the other two are 4-inches in from each end. Hope this helps.
|
11-18-2011, 12:15 PM | #5 |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,521
|
Re: 29 Running Board Aprons
Randy, you mentioned the "V" groove but in reality, isn't that supposed to be a
"U" groove there? I guess I also need to look at an original to get you the correct diameter sized hole too. |
11-18-2011, 12:22 PM | #6 |
Senior Member
Join Date: Jul 2011
Posts: 146
|
Re: 29 Running Board Aprons
Sponsored Links (Register now to hide all advertisements)
Thanks, Randy |
11-18-2011, 12:58 PM | #7 |
Senior Member
Join Date: Jun 2010
Location: MN.
Posts: 253
|
Re: 29 Running Board Aprons
1/4-inch diameter holes, and yes it is u-shaped
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|