|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-27-2010, 10:09 AM | #1 |
BANNED
Join Date: May 2010
Location: Walla Walla, Washington USA
Posts: 6,066
|
Cad Plating sheen...
After bead blasting some parts for Cad Plating, I see that those parts have a gray sheen to the metal.
When the parts are buffed clean with a wire wheel, those parts have their natural sheen of silver. Would there be a color difference with the cad plating when the two were plated or would the sheen be the same. If different, which would match the original sheen of cad plating, the grayish part or the silver part? I have never seen a true, new old stock cad plated part. Does anyone have any? Thanks. Pluck |
08-27-2010, 10:26 AM | #2 |
Senior Member
Join Date: May 2010
Location: Windy City
Posts: 2,919
|
Re: Cad Plating sheen...
Sponsored Links (Register now to hide all advertisements)
Try this link. You can click on individual pictures and they get bigger. http://429mustangcougarinfo.50megs.com/new_page_26.htm |
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|