Go Back   The Ford Barn > General Discussion > Model A (1928-31)
Reload this Page Differential rebuild

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 05-09-2016, 06:30 PM   #1
Mongo
Member
 
Join Date: May 2010
Posts: 62
Smile Differential rebuild
I took a differential apart.
I installed new bearings etc.
When I put it back together, I ended up with approx. 22 thou of gaskets on each side to get the backlash and preload correct.All the reading I have done indicate between 10-15 thou.
I have checked all bearing seats etc. for interference.
Is that too many gaskets?
Mongo is offline   Reply With Quote
 

« Previous Thread | Next Thread »

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 10:36 PM.