The Ford Barn

Ziffer · 07-21-2015, 08:14 PM

I am using a '39 Transmission with the truck/open drive shaft output. The mount has the hole for the speedo but does anyone make one that is at a right angle?

Thanks
Z

Kurt in NJ · 07-21-2015, 08:41 PM

http://www.texasindustrialelectric.com/speedo.asp

never dealt with them, but it looks like they have a good selection

Tony, NY · 07-21-2015, 08:54 PM

Sponsored Links (Register now to hide all advertisements)

Another possibility. http://www.transmissioncenter.net/sp...n_______va.htm

07-21-2015, 08:14 PM	#1
Ziffer Senior Member Join Date: May 2010 Location: Michigan Posts: 171	Right angle speedo drive for open drive shaft truck transmission I am using a '39 Transmission with the truck/open drive shaft output. The mount has the hole for the speedo but does anyone make one that is at a right angle? Thanks Z

07-21-2015, 08:41 PM	#2
Kurt in NJ Senior Member Join Date: May 2010 Location: on the Littlefield Posts: 6,159	Re: Right angle speedo drive for open drive shaft truck transmission http://www.texasindustrialelectric.com/speedo.asp never dealt with them, but it looks like they have a good selection

07-21-2015, 08:54 PM	#3
Tony, NY Senior Member Join Date: May 2010 Location: Capital of Corruption , NY Posts: 811	Re: Right angle speedo drive for open drive shaft truck transmission Sponsored Links (Register now to hide all advertisements) Another possibility. http://www.transmissioncenter.net/sp...n_______va.htm