|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
12-27-2011, 07:08 PM | #1 |
Member
|
lug nuts for 16" wheels
Can I use the model A lug nuts when I install 16" wheels? If not, will modern lug nuts do the job? Thanks in advance.
|
12-27-2011, 08:25 PM | #2 |
Senior Member
Join Date: May 2010
Location: Asheville,NC
Posts: 3,104
|
Re: lug nuts for 16" wheels
Yes to both.
|
Sponsored Links (Register now to hide all advertisements) |
|
12-27-2011, 08:28 PM | #3 |
Senior Member
Join Date: May 2010
Location: Suttons Bay, Mich.
Posts: 3,385
|
Re: lug nuts for 16" wheels
I use the stock A lugs on all my 16 inch wheels. Mostly because I love the way they look even if they are under a hub cap.
__________________
Respecting and Resurrecting Ford Model A's. |
12-27-2011, 08:31 PM | #4 |
Senior Member
Join Date: May 2010
Location: ca.
Posts: 2,522
|
Re: lug nuts for 16" wheels
been using stock nuts for like 8-9 yrs ............. steve
__________________
V4f |
12-27-2011, 10:51 PM | #5 |
Junior Member
Join Date: Oct 2011
Location: Rocklin Ca.
Posts: 18
|
Re: lug nuts for 16" wheels
I was told that the acorn were not advisable as the internal depth of the nut and the stud length were too tight to insure a snug fit over 16 inch rims. With that said I run them for a year, before I replaced them with standard. This was more out of need for the acorns of my other A then concern the nuts were not tight.
|
12-29-2011, 11:41 AM | #6 |
Member
|
Re: lug nuts for 16" wheels
Sponsored Links (Register now to hide all advertisements)
|
12-29-2011, 12:34 PM | #7 | |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,033
|
Re: lug nuts for 16" wheels
Quote:
Charlie Stephens |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|