|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-26-2023, 08:59 PM | #1 |
Junior Member
Join Date: Oct 2017
Location: DeLand, Florida
Posts: 16
|
Stock 30/31 RPU Seat
Hello All,
What are the stock dimensions for the bottom, and back spring for a 31 RPU? I came across a new set that was at an estate sale where the guy restored A's, and T's. One spring is 42.5" wide at the back width, and narrower at the front. It is 18" front to back. The pics with the cardboard are what I think is the back. Thank you for the help, as I can find any measurement information.
__________________
Thank You, Daniel Nelson 1957 Ford Fairlane, and building a 1931 Ford Roadster Pickup. |
11-26-2023, 11:58 PM | #2 |
Senior Member
Join Date: May 2010
Location: Concord CA
Posts: 637
|
Re: Stock 30/31 RPU Seat
In 31 the bottom spring changed; I think it may have been when the indented fire wall was phased in. The later spring is shorter front to back.
|
Sponsored Links (Register now to hide all advertisements) |
|
11-28-2023, 08:34 PM | #3 |
Junior Member
Join Date: Oct 2017
Location: DeLand, Florida
Posts: 16
|
Re: Stock 30/31 RPU Seat
I have heard that also, but nobody shares the actual dimensions. At this point, I wouldn't care if it was an early 30, or a late 31. I just want to know what I'm looking for.
__________________
Thank You, Daniel Nelson 1957 Ford Fairlane, and building a 1931 Ford Roadster Pickup. |
11-28-2023, 09:24 PM | #4 |
Senior Member
Join Date: May 2010
Location: Epping N.H.
Posts: 2,989
|
Re: Stock 30/31 RPU Seat
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|