02-19-2024, 07:56 PM | #1 |
Member
Join Date: Jan 2011
Location: Mosheim Tenn
Posts: 39
|
Frame issues
I posted this already once,but put it in the wrong forum..to the staff..I apologize. I have acquired a barn find 63 Galaxie fastback,which has been wrecked,several years ago. 23 to be exact..at any rate,I took it apart today to assess the damages. Not favorable. Frames bent.i have a parts car with a good frame. If I have to ill swap,however,I have a couple of questions I'd like to get answered first..I'm soliciting any good advice..
1st..I live in east tenn and prefer to find a frame shop for estimate on repairing..anyone have any recommendations? Secondly..if I have to roll it out..can I conceivably change frame out without removing the glass in the car? One man operation,unfortunately and a budget..can anyone give me any insight? I'm 65 so my abilities are limited also at this stage in life..lol.thanks in advance and happy motoring. |
02-19-2024, 08:52 PM | #2 |
Senior Member
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,407
|
Re: Frame issues
There is a guy over in the Model A forum who is from Johnson City, TN, he may know of a shop that could help with your frame. His user name is Brent from 10-uh-C. He also has a website model-a-ford.com if you want to contact him that way. Good luck with your project, I love those 63 1/2 models.
|
Sponsored Links (Register now to hide all advertisements) |
|
02-19-2024, 10:10 PM | #3 |
Senior Member
Join Date: Aug 2012
Location: Abq, NM
Posts: 3,607
|
Re: Frame issues
Depending on how strict the DMV regulations are there in Tennessee they may want to see the serial number on the frame (assuming a '63 has them) when you go to Title or Register the car for the road, or eventually sell it.
If you've got paperwork for the frame that can help. Here in NM if the paperwork for your 'older' pre-modern era VIN marked vehicle doesn't match the serial number on the vehicle you can only get a Bonded title, if you're lucky and pay the extra fees. I bought a '55 from out of state and the DMV folks knew to look for the frame number and refused to accept anything else. |
02-19-2024, 10:28 PM | #4 |
Senior Member
Join Date: May 2010
Location: 215 E. 6th Street Northport, Michigan 49670
Posts: 941
|
Re: Frame issues
The guy ZEKE3 mentioned lives in Elisabethton Tenn. His name is Brent Terry and owns a big Model A Shop there. He is an extremely knowledgable car guy.
__________________
Bob from Northport Northport, Michigan |
02-20-2024, 07:36 AM | #5 |
Member
Join Date: Jan 2011
Location: Mosheim Tenn
Posts: 39
|
Re: Frame issues
Thank you all for the input. I will attempt to reach out to Mr. Terry.
|
02-20-2024, 08:49 AM | #6 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,485
|
Re: Frame issues
Sponsored Links (Register now to hide all advertisements)
You need to determine if the car is truly an early build 63 1/2 406 GALAXIE. If all numbers match, you just might be a rich guy. I am guessing the collision damage is on the front end? If so you need to find the VIN on the frame and see if it matches the PATENT PLATE. If it matches, that frame needs to stay with the car as for car value. There has to be a PROFESSION SPRING AND ALIGNMENT SHOP around K-TOWN or BRISTOL - JOHNSON CITY. Take photos of the frame when inquiring as to possible straightening. The extra frame can be used for x-members and such. Are you comfortable giving the first five characters of the VIN? Photos help. Similar Threads - https://www.fordbarn.com/forum/showthread.php?t=333410 https://www.fordbarn.com/forum/showt...09#post2292409 I don't know for sure how to find this information (I should at this late date), but I am going to find out. I know STATE DMV's have the info.
__________________
***** We should have a contest. The player has to start at the very last post of a thread & then try to guess what the OP's original question was about ... Last edited by KULTULZ; 02-20-2024 at 09:22 AM. |
02-20-2024, 10:32 AM | #7 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,520
|
Re: Frame issues
Quote:
|
|
02-20-2024, 05:47 PM | #8 |
Senior Member
Join Date: Dec 2014
Location: Columbus, IN
Posts: 1,407
|
Re: Frame issues
Excellent, thank you!
|
02-21-2024, 11:14 AM | #9 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,485
|
Re: Frame issues
Here is a referring URL discussing VIN STAMPINGS -
https://www.fordfe.com/63-5-galaxie-...ns-t99056.html The guys over there are good.
__________________
***** We should have a contest. The player has to start at the very last post of a thread & then try to guess what the OP's original question was about ... |
02-21-2024, 07:00 PM | #10 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,485
|
Re: Frame issues
Source of VIN information -
I know in MD if there was a question regarding registration, the MVA/SP had a facility in Glen Burnie that would decide it for you ... Other than a 67 GT-500, I never had trouble with registration (MD) or had any high dollar car requiring a check.
__________________
***** We should have a contest. The player has to start at the very last post of a thread & then try to guess what the OP's original question was about ... Last edited by KULTULZ; 02-22-2024 at 07:31 PM. Reason: THE USUAL - ADVANCED CRS |
02-27-2024, 06:11 PM | #11 |
Member
Join Date: Jan 2011
Location: Mosheim Tenn
Posts: 39
|
Re: Frame issues
Thank you too all of you for all your input and help. Much appreciated!
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|