|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
11-20-2015, 12:16 PM | #1 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 1,052
|
Carb Identification 2-Brl
Alright guy's, my turn, I need help ID'ing some 2-Brl carbs.
Hope the photo below helps? Am not sure if the box pictured with the part number is the actual carb box. It is the one customer supplied. Thanks, Gary in N.Y. P.S. They are all in boxes labeled "Remanufactured" by Ford??
__________________
http://www.stromberg-bulletin.com/me...berg-equipped/ |
11-20-2015, 12:45 PM | #2 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,654
|
Re: Carb Identification 2-Brl
They are Ford Holley 94s. The box is identified as having an EAB, which likely matches at least one of your carbs. Model IDs are on the driver side bowl.
__________________
Alan |
Sponsored Links (Register now to hide all advertisements) |
|
11-20-2015, 01:35 PM | #3 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,527
|
Re: Carb Identification 2-Brl
The outer two are 49 - 53 carbs. The center one is for a Y-block.
|
11-20-2015, 03:40 PM | #4 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Re: Carb Identification 2-Brl
It appears the carb in the center has a "1" on it in the circle (venturi diameter). If so, it's for a 1954 239 Y-Block passenger car. 1954 was the 1st year to use the spark valve. In '55 and '56 the carbs had "1 1/16" in the circle. Also, all 3 are for Ford passenger cars and not trucks, based on the air cleaner mounting style.
Sal |
11-20-2015, 03:43 PM | #5 |
Senior Member
Join Date: Jun 2010
Location: Detroit suburb, MI
Posts: 3,706
|
Re: Carb Identification 2-Brl
Also, EAB-9510-C is for a '52 Ford with manual trans originally, but will probably work on '49 to '53.
Sal |
11-20-2015, 03:45 PM | #6 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,654
|
Re: Carb Identification 2-Brl
Sponsored Links (Register now to hide all advertisements)
__________________
Alan |
11-20-2015, 04:24 PM | #7 |
Member Emeritus
Join Date: May 2010
Location: Madison, NJ
Posts: 5,230
|
Re: Carb Identification 2-Brl
Post #2 tells you how to sort...the model # on left of bowl identifies the carb and is also the prefix for the part number.
|
11-21-2015, 09:48 AM | #8 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 1,052
|
Re: Carb Identification 2-Brl
Appreciate all the responses, you've been extremely helpful.
Thanks, Gary in N.Y. P.S. The owner of these carbs is probably going to sell them off, if anyone has any interest in them just P.M. me. I will put you in direct contact with the owner.
__________________
http://www.stromberg-bulletin.com/me...berg-equipped/ |
|
|
Sponsored Links (Register now to hide all advertisements) |
|