|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-04-2019, 11:34 AM | #1 |
Senior Member
Join Date: Jan 2012
Location: New Jersey
Posts: 356
|
zenith 1 identifaction help
I've decided to take apart my extra carb. and in doing so found these markings on it I hope some of you guys can explain. the lower half stamped zenith 1 .....the letter E in raised form is in the center on the opposite side of the secondary well position and stamped in about 1-1/4 in. inboard past the choke hole is the # 59 ..on the upper half at the throttle hole raised is the #B50 then inside the carb on the float bowel section is the raised letter H and raised # 29 ...Holly?? I'd appreciate any help in this thanks THE HOOCH
|
02-04-2019, 11:44 AM | #2 |
Senior Member
Join Date: May 2010
Location: brentwood, ca
Posts: 4,247
|
Re: zenith 1 identifaction help
Sponsored Links (Register now to hide all advertisements)
|
Sponsored Links (Register now to hide all advertisements) |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|