|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-07-2011, 05:23 PM | #1 |
Junior Member
Join Date: Jul 2010
Location: Chicago
Posts: 27
|
Turn signal issue.
I have installed turn signals using LED front bumper mounts and LED tail lights on both sides. I have a shaft mounted lever switch and have the flasher unit with the extra ground. Everything works beautifully until I start the car and then nothing flashes. Tried running it through the switch, through the battery. Ground through the body and to the battery direct. nothing changes. Why am I having such trouble with the engine running.
|
09-07-2011, 06:34 PM | #2 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,116
|
Re: Turn signal issue.
Put a regular flasher in it -- one without the pigtail ground. That fixed mine.
|
Sponsored Links (Register now to hide all advertisements) |
|
09-07-2011, 08:27 PM | #3 |
Junior Member
Join Date: Jul 2010
Location: Chicago
Posts: 27
|
Re: Turn signal issue.
I will try that. I had one originally but they would not flash at all. I was told it was because of the LEDs. I don't get why they work with the engine not running but not with it running. What's the connection?
|
09-08-2011, 02:07 AM | #4 |
Senior Member
Join Date: Nov 2010
Location: Anchorage, Alaska
Posts: 9,116
|
Re: Turn signal issue.
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|