|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-15-2019, 01:50 PM | #1 |
Member
Join Date: Mar 2018
Location: King NC
Posts: 98
|
options for electronic ignition conversion on my '41
Hello all,
I'm seriously considering going to electronic ignition on my '41 PU. I'm sitting here now with a no start, no fire situation. The truck has the helmet style distributor with the coil adapter kit added at some point. I don't know any of the history about the truck except it sat for close to 30 years prior to me getting it last year. It's been running and drivable. It's been converted to a 12v system. I've replaced the coil with bosch blue coil shortly after getting the truck and also replaced the plug wires. I wanted to stay with the stock system and at some point in time pull it and send it to Bubbas for refresh, but I wasn't ready to quite yet. I have been trying to track down what my current issue is. I'm getting voltage to the coil, but no spark. I've did a search on the electronic coversions and they seem to be pretty popular. I guess I'm confused on what you do about timing advance and so on with the electronic systems and also recommendations on what brand. Thanks in advance, Randy |
07-15-2019, 03:24 PM | #2 | |
Senior Member
Join Date: Sep 2011
Location: Christchurch New Zealand
Posts: 1,611
|
Re: options for electronic ignition conversion on my '41
Quote:
Phil NZ |
|
Sponsored Links (Register now to hide all advertisements) |
|
07-15-2019, 03:28 PM | #3 |
Senior Member
Join Date: May 2010
Location: Columbia, SC
Posts: 1,579
|
Re: options for electronic ignition conversion on my '41
I'd try to get the stock system working first, since there's no guarantee that converting to electronic will fix the problem(s). JMTCW.
|
07-15-2019, 03:48 PM | #4 |
Senior Member
|
Re: options for electronic ignition conversion on my '41
Remove it and look for any issues Clean and reset the points gap
|
07-15-2019, 04:58 PM | #5 |
Senior Member
Join Date: May 2010
Location: Sugar Land, TX
Posts: 4,395
|
Re: options for electronic ignition conversion on my '41
I have a crab with electronic on both my 36 and 41. Can't beat it.
__________________
41 woodie https://41fordwoodie.weebly.com/ |
07-15-2019, 05:14 PM | #6 |
Senior Member
Join Date: Jun 2014
Location: Williamsburg, VA
Posts: 1,627
|
Re: options for electronic ignition conversion on my '41
Sponsored Links (Register now to hide all advertisements)
|
07-15-2019, 05:28 PM | #7 |
Member
Join Date: Mar 2018
Location: King NC
Posts: 98
|
Re: options for electronic ignition conversion on my '41
It was the condenser. Had to drive into town to get one. My original question still stands about the electronic conversion.
My plans for the truck are to drive it around town 10-20 miles at a time, 300 to 400 miles a year. The info I read on the stock distributor was kinda scary. Takes a special machine to set it up and so on. Although once set up correctly gives good service. I've invested in a new coil and wires already and would like to stay with the stock set up. |
07-15-2019, 06:01 PM | #8 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,319
|
Re: options for electronic ignition conversion on my '41
You're already most of the way home. With the way you are planning on using the truck, the stock ignition will probably last longer than you will. Millions of backyard mechanics had no problems getting these distributors to work over the last 80 years. I'm an "8BA guy", so I'm no expert, but I think there is a way to set these distributors correctly with two rulers. I'm sure somebody will jump in.
|
07-15-2019, 06:56 PM | #9 |
Senior Member
Join Date: May 2010
Posts: 1,770
|
Re: options for electronic ignition conversion on my '41
put a crab on it forget that electronic stuff you will always get home with points
|
07-15-2019, 08:50 PM | #10 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: options for electronic ignition conversion on my '41
No one makes a good kit for the 41 Helmet..............Crabs yes but helmets no. The condensors on those coil adapters are the worlds worse !!!!!!!!!
|
07-15-2019, 11:15 PM | #11 |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: options for electronic ignition conversion on my '41
I use a napa ih200 on my helmet. Went through a couple to get a good one out of the box. okay so far. Not the best "maybe" but it's easy to get. No issues so far 2 yrs of easy starts and top speed of 75 with the Mitchell. No complaints. I know there are better and maybe someone will add. FA something????
Rebuilt helmet dizzy. Skip coil. Solid Points don't just quit. . Last edited by Tinker; 07-15-2019 at 11:47 PM. |
07-15-2019, 11:44 PM | #12 |
Senior Member
Join Date: Oct 2013
Location: Glens Falls NY
Posts: 1,267
|
Re: options for electronic ignition conversion on my '41
My '47 uses a crab with points and Bosch blue coil. Previously had several Pentroniz units burn out ($$$$) and could not find out why - apparently voltage sensitivity - they didn't "get me home". Had it converted it back to points and all good now. I also carry a spare in trunk .... easy two-bolt replacement.
|
07-16-2019, 04:10 AM | #13 |
Senior Member
Join Date: May 2010
Location: Solihull, England.
Posts: 8,754
|
Re: options for electronic ignition conversion on my '41
Buy another condenser now, make sure it and the one you have just bought both work, and put one in the glove box as a spare. also carry the tools required to change it.
Mart. |
07-16-2019, 10:15 AM | #14 |
Senior Member
Join Date: Oct 2011
Location: CT.
Posts: 596
|
Re: options for electronic ignition conversion on my '41
I have used a pertronix module in both my flatheads for years. They are crab type dist. Not helmet style. Do not think it is made for the helmet. Be sure and use their coil with the conversion, and remove the ignition resister. Good Luck
__________________
A man should do what he thinks best! "The Duke" |
07-16-2019, 11:45 AM | #15 |
Senior Member
Join Date: Mar 2011
Location: upstate NY
Posts: 478
|
Re: options for electronic ignition conversion on my '41
How much of a difference is there when you use another coil?
|
07-16-2019, 01:17 PM | #16 |
Senior Member
Join Date: Jun 2014
Location: Williamsburg, VA
Posts: 1,627
|
Re: options for electronic ignition conversion on my '41
Probably not any if you use a coil with 1.5 ohm built in resistance, like the Bosch blue coil. But with electronic ignition, why use anything other than exactly the unit recommended by the ignition manufacturer?
|
07-16-2019, 01:25 PM | #17 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: options for electronic ignition conversion on my '41
I thought the Bosch blue coil was 3.0 ohms? OK, think I may have misread your post!! Your saying 1.5 ohm primary winding resistance + 1.5 ohm built in additional resistance. Technically there is not an internal added 1.5 ohms of resistance, it's just the windings are such that the primary resistance ends up being 3.0 ohms. But doesn't really matter in this context.
Last edited by JSeery; 07-16-2019 at 01:34 PM. |
07-16-2019, 05:39 PM | #18 | |
Senior Member
Join Date: Jun 2014
Location: Williamsburg, VA
Posts: 1,627
|
Re: options for electronic ignition conversion on my '41
Quote:
|
|
07-17-2019, 06:37 AM | #19 | |
Senior Member
Join Date: Oct 2016
Location: harpursville ny
Posts: 1,040
|
Re: options for electronic ignition conversion on my '41
Quote:
|
|
07-17-2019, 07:10 AM | #20 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: options for electronic ignition conversion on my '41
I for one do not recommend the Pertronix coil . Prefer a German made Bosch Blue coil or a 2.2 ohm Beru German coil.....
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|