The Ford Barn

Fillinjc · 10-06-2015, 07:02 PM

Hi,

Pulling apart the transmission in my 1930 coupe in order to do some troubleshooting. Following Les Andrews Vol 1 shows the front bearing retainer under the bell housing. Mine appears to be one with the bell housing. Is this not a standard Ford part?

Just curious.

Thanks,
Jerry

bdave_mcc · 10-06-2015, 07:15 PM

Sponsored Links (Register now to hide all advertisements)

Give it a tap or two, that thing should have stayed with the transmission. Probably just stuck in there good. The retainer isn't actually under the bellhousing, the bellhousing fits around in like yours is.

10-06-2015, 07:15 PM	#2
bdave_mcc Senior Member Join Date: Dec 2013 Location: McCalla, AL Posts: 181	Re: Front Transmission Bearing Retainer Sponsored Links (Register now to hide all advertisements) Give it a tap or two, that thing should have stayed with the transmission. Probably just stuck in there good. The retainer isn't actually under the bellhousing, the bellhousing fits around in like yours is.