The Ford Barn

AnthonyG · 02-23-2023, 06:50 PM

8BA/ flushed engine, put new antifreeze green, while idling during timing & carbs adjust it decided to blow out about a quart or so of new coolant. I have temp gauges on both banks & it wasn’t running hot, 185 right side 195 left side. After blowing out the quart+ it stopped. I let it continue running & temp stayed about the same. I’m delinquent in flushing & changing , been a few years. Engine has 4” bore Merc crank, domed pistons, 2 X 2 Holley 94, oversize valves, Mallory e-Dist. & Isky cam.
I vaguely remember a post & thread a few years ago saying if engine & radiator r over filled it should seek its own level ( I filled to about a 1/2 “ below top of rad. Tank)? While it didn’t happen a few years ago that I remember I’m
Thinking that’s Probly what happened?

oldbugger · 02-23-2023, 07:33 PM

If you look in the radiator where is the coolant in relation to the top of the cores

paul2748 · 02-23-2023, 08:20 PM

After the loss, is the coolant over the top of the core? If so, It looks like it is ok

Ken/Alabama · 02-23-2023, 11:19 PM

Quote:

Originally Posted by AnthonyG

8BA/ flushed engine, put new antifreeze green, while idling during timing & carbs adjust it decided to blow out about a quart or so of new coolant. I have temp gauges on both banks & it wasn’t running hot, 185 right side 195 left side. After blowing out the quart+ it stopped. I let it continue running & temp stayed about the same. I’m delinquent in flushing & changing , been a few years. Engine has 4” bore Merc crank, domed pistons, 2 X 2 Holley 94, oversize valves, Mallory e-Dist. & Isky cam.
I vaguely remember a post & thread a few years ago saying if engine & radiator r over filled it should seek its own level ( I filled to about a 1/2 “ below top of rad. Tank)? While it didn’t happen a few years ago that I remember I’m
Thinking that’s Probly what happened?

Wow! 4” bore ? Do you even have a cylinder wall left ??

Alaska Jim · 02-23-2023, 11:24 PM

you probably had an air pocket when you refilled the rad. when the t-stat opened it purged the air , most likely . let the eng run until it reaches operating temp with the cap off and then top off the tank until it just covers the tubes

highbeams · 02-24-2023, 01:49 AM

Sponsored Links (Register now to hide all advertisements)

Installation of an empty overflow container works.

AnthonyG · 02-24-2023, 09:46 AM

Paul & oldbugger, coolant is covering the core by about 1/2". Ken, you are right, probably at 4" the wall would be gone. Ive had many engines and vehicles in my 73 yrs and had a brainfart, 4" was on many of the SBC's i had. The 8BA is the only flathead Ford and it's been 12 years since buying it. went from memory

oops! rechecked paper work and it was bored to 3 5/16".
Thx all

blackforty · 02-24-2023, 03:49 PM

sounds like you got it figured out.

47Monarch · 02-24-2023, 08:07 PM

A few years back was having a small heating issue didn't know why flushed new coolest etc. Found out some how the over flow tube was plugged about midway.i ran a piece of weed whacked line through the tube .blocked solid. Cut metal tube off and replaced with rubber. Might want to check it out

02-23-2023, 06:50 PM	#1
AnthonyG Senior Member Join Date: May 2013 Location: Pa. Posts: 2,174	Coolant blew out overflow on radiator? 8BA/ flushed engine, put new antifreeze green, while idling during timing & carbs adjust it decided to blow out about a quart or so of new coolant. I have temp gauges on both banks & it wasn’t running hot, 185 right side 195 left side. After blowing out the quart+ it stopped. I let it continue running & temp stayed about the same. I’m delinquent in flushing & changing , been a few years. Engine has 4” bore Merc crank, domed pistons, 2 X 2 Holley 94, oversize valves, Mallory e-Dist. & Isky cam. I vaguely remember a post & thread a few years ago saying if engine & radiator r over filled it should seek its own level ( I filled to about a 1/2 “ below top of rad. Tank)? While it didn’t happen a few years ago that I remember I’m Thinking that’s Probly what happened? __________________ Nomad

02-23-2023, 07:33 PM	#2
oldbugger Senior Member Join Date: May 2010 Location: Holland Mi Posts: 642	Re: Coolant blew out overflow on radiator? If you look in the radiator where is the coolant in relation to the top of the cores

02-23-2023, 08:20 PM	#3
paul2748 Senior Member Join Date: May 2010 Location: Midland Park, NJ Posts: 3,982	Re: Coolant blew out overflow on radiator? After the loss, is the coolant over the top of the core? If so, It looks like it is ok __________________ 48 Ford Conv 56 Tbird 54 Ford Victoria

02-23-2023, 11:24 PM	#5
Alaska Jim Senior Member Join Date: May 2010 Location: Palmer, Alaska Posts: 1,575	Re: Coolant blew out overflow on radiator? you probably had an air pocket when you refilled the rad. when the t-stat opened it purged the air , most likely . let the eng run until it reaches operating temp with the cap off and then top off the tank until it just covers the tubes

02-24-2023, 01:49 AM	#6
highbeams Senior Member Join Date: Dec 2014 Location: California Posts: 802	Re: Coolant blew out overflow on radiator? Sponsored Links (Register now to hide all advertisements) Installation of an empty overflow container works.

02-24-2023, 09:46 AM	#7
AnthonyG Senior Member Join Date: May 2013 Location: Pa. Posts: 2,174	Re: Coolant blew out overflow on radiator? Paul & oldbugger, coolant is covering the core by about 1/2". Ken, you are right, probably at 4" the wall would be gone. Ive had many engines and vehicles in my 73 yrs and had a brainfart, 4" was on many of the SBC's i had. The 8BA is the only flathead Ford and it's been 12 years since buying it. went from memory oops! rechecked paper work and it was bored to 3 5/16". Thx all __________________ Nomad

02-24-2023, 03:49 PM	#8
blackforty Junior Member Join Date: Dec 2016 Posts: 10	Re: Coolant blew out overflow on radiator? sounds like you got it figured out.

02-24-2023, 08:07 PM	#9
47Monarch Senior Member Join Date: Aug 2018 Location: Sydney Nova Scotia Posts: 126	Re: Coolant blew out overflow on radiator? A few years back was having a small heating issue didn't know why flushed new coolest etc. Found out some how the over flow tube was plugged about midway.i ran a piece of weed whacked line through the tube .blocked solid. Cut metal tube off and replaced with rubber. Might want to check it out