|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
08-24-2018, 02:02 PM | #1 |
Senior Member
Join Date: May 2010
Posts: 247
|
!932 Roadster/Phaeton top iron parts
I,m just wondering if certain parts are available for my 32 Phaeton top irons.
I have a set of top irons that are missing the front corner piece that slides over the windshield post , The front top bow also attaches to this piece. Before I fabricate the pieces,I thought I,d see if that piece was available. Thanks |
08-24-2018, 02:21 PM | #2 |
Senior Member
Join Date: May 2010
Location: Southern France
Posts: 5,314
|
Re: !932 Roadster/Phaeton top iron parts
Check with Karl Wescott as he is in the process of making 32 roadster top irons.That piece is the same.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-24-2018, 02:28 PM | #3 |
Senior Member
Join Date: May 2010
Location: Snohomish,WA
Posts: 1,032
|
Re: !932 Roadster/Phaeton top iron parts
I'm sure Karl Wescott should be able to take care of you. Hopefully he will chime in , otherwise give him a call or message him here
|
08-24-2018, 02:47 PM | #4 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,292
|
Re: !932 Roadster/Phaeton top iron parts
I should have those in about 60 days... I will not know pricing until I actually get some made.
|
08-24-2018, 03:30 PM | #5 |
Senior Member
Join Date: May 2010
Posts: 247
|
Re: !932 Roadster/Phaeton top iron parts
|
11-06-2018, 12:41 PM | #6 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,292
|
Re: !932 Roadster/Phaeton top iron parts
Sponsored Links (Register now to hide all advertisements)
|
11-06-2018, 01:20 PM | #7 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,111
|
Re: !932 Roadster/Phaeton top iron parts
Karl,
Dumb question, but here goes. Will there be only a single attachment to the header bow per side? |
11-06-2018, 01:29 PM | #8 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,292
|
Re: !932 Roadster/Phaeton top iron parts
I photographed the top of one side and the bottom of the other, the web on the bottom of the casting shadowed the header mounting screw location.
These are drilled/countersunk for 5/16 on the inboard holes and 1/4 on the outboard holes as per the originals I examined. I attached another photo for clarity. The holes for attaching to the irons will have to be drilled. |
11-06-2018, 01:48 PM | #9 |
Senior Member
Join Date: May 2010
Location: Snohomish,WA
Posts: 1,032
|
Re: !932 Roadster/Phaeton top iron parts
Like all of Wescotts castings, they look great! Great job Karl
|
11-06-2018, 02:19 PM | #10 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,111
|
Re: !932 Roadster/Phaeton top iron parts
Karl,
Thanks for the clarification (I assumed as much, but some might not.) |
11-10-2018, 01:34 PM | #11 |
Senior Member
Join Date: May 2010
Posts: 247
|
Re: !932 Roadster/Phaeton top iron parts
Received my corner blocks from Karl.
Very nice,reasonably priced and prompt service. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|