The Ford Barn

Lamar Wadsworth · 05-29-2023, 07:31 PM

I have a valley cover with the provision for a PCV valve. Removed the crankcase breather and made a block-off plate to cover the hole. Now I need the spacer under the carb that has the provision for the vacuum line to the PCV valve. Anybody know where I can get one? This is a 272 with 2 barrel.

Hot Rod Reverend · 05-29-2023, 11:32 PM

Sponsored Links (Register now to hide all advertisements)

Here is one offering, but some of the guys that deal with Strombergs and Flatheads may have options. https://www.ebay.com/itm/23499383955...Bk9SR_KD266NYg

Bear in mind that the company may have other options than the one I found pretty quickly - I think the open chamber would work but would not be as good as a spacer that had the two holes to match the carburetor/intake bores.

05-29-2023, 07:31 PM	#1
Lamar Wadsworth Senior Member Join Date: May 2010 Posts: 314	'55 272 2 barrel carb spacer I have a valley cover with the provision for a PCV valve. Removed the crankcase breather and made a block-off plate to cover the hole. Now I need the spacer under the carb that has the provision for the vacuum line to the PCV valve. Anybody know where I can get one? This is a 272 with 2 barrel.

05-29-2023, 11:32 PM	#2
Hot Rod Reverend Senior Member Join Date: May 2010 Location: Lancaster, CA Posts: 917	Re: '55 272 2 barrel carb spacer Sponsored Links (Register now to hide all advertisements) Here is one offering, but some of the guys that deal with Strombergs and Flatheads may have options. https://www.ebay.com/itm/23499383955...Bk9SR_KD266NYg Bear in mind that the company may have other options than the one I found pretty quickly - I think the open chamber would work but would not be as good as a spacer that had the two holes to match the carburetor/intake bores. __________________ Lancaster, California Visit hotrodreverend.com to view hundreds of pictures and videos of the build of the 1955 Ford Club Sedan!