The Ford Barn

Tim Ayers · 10-29-2017, 11:12 AM

Is there someone reproducing correct ‘32 pedal pads? Were they metal or rubber from the factory? Thanksl

deuce lover · 10-29-2017, 11:30 AM

I have a Drake set and they fit fine.Vulcanized over metal.

deuce_roadster · 10-29-2017, 12:21 PM

You may have noticed that that 32 pedal pads have 4 bumps that locate in notches in the pedal that keep them from turning and they are held on with a nut. Later pads screw into the pedal, that is the pedal hole is threaded..

Floyd · 10-29-2017, 12:52 PM

Sponsored Links (Register now to hide all advertisements)

The Drake ones are the best ones made. You just need to paint the back side brass to look like the flash plated originals. Has the Ford script. Save the thin nuts and washer from your originals
My opinion

10-29-2017, 11:30 AM	#2
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,308	Re: ‘32 pedal pads I have a Drake set and they fit fine.Vulcanized over metal.

10-29-2017, 12:21 PM	#3
deuce_roadster Senior Member Join Date: Oct 2011 Location: Shelton, WA Posts: 3,801	Re: ‘32 pedal pads You may have noticed that that 32 pedal pads have 4 bumps that locate in notches in the pedal that keep them from turning and they are held on with a nut. Later pads screw into the pedal, that is the pedal hole is threaded..

10-29-2017, 12:52 PM	#4
Floyd Senior Member Join Date: May 2010 Posts: 468	Re: ‘32 pedal pads Sponsored Links (Register now to hide all advertisements) The Drake ones are the best ones made. You just need to paint the back side brass to look like the flash plated originals. Has the Ford script. Save the thin nuts and washer from your originals My opinion