|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
07-22-2018, 09:24 AM | #1 |
Senior Member
Join Date: Mar 2017
Location: Grandville, MI
Posts: 280
|
floorboard dims
I was wondering if anyone had the dims for the main floor section for a 47 Ford long door coupe
|
07-22-2018, 10:37 AM | #2 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,645
|
Re: floorboard dims
Your post is pretty dim. I can't imagine what you want.
__________________
Alan |
Sponsored Links (Register now to hide all advertisements) |
|
07-22-2018, 10:44 AM | #3 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: floorboard dims
I think he is asking about a source for the floor dimmer switch. Maybe! After re-reading the OP I think he is referring to the floor itself, not the dimmer switch.
Last edited by JSeery; 07-22-2018 at 11:34 AM. |
07-22-2018, 11:07 AM | #4 |
Senior Member
Join Date: Dec 2011
Location: Oakville Ontario
Posts: 586
|
Re: floorboard dims
I think he was asking for the dimensions possibly?
|
07-22-2018, 11:30 AM | #5 |
Member Emeritus
Join Date: Nov 2012
Location: Wichita KS
Posts: 16,132
|
Re: floorboard dims
54 I think you are right!
|
07-22-2018, 12:00 PM | #6 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: floorboard dims
Sponsored Links (Register now to hide all advertisements)
I don't have dimensions for those cars but they I generally use the original floor as a pattern to create patches. I avoid cars with no floor. They are better off as donor cars till someone starts reproducing the floors for them. There is bound to be a 42 thru 48 owner that can help. The shape of the floor doesn't lend itself to accurate measurements unless a person specifies control points to do the measuring from. |
07-22-2018, 12:18 PM | #7 |
Senior Member
Join Date: Jul 2014
Location: Guston,ky
Posts: 653
|
Re: floorboard dims
theres a front floor on ebay now.
the aftermarket ones dont fit at all, I had to cut and hammer and screw and use a lot of silicone to get it sealed. Last edited by edhd58; 07-22-2018 at 12:20 PM. Reason: add text |
07-22-2018, 12:32 PM | #8 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 5,963
|
Re: floorboard dims
My floorboard dims every time I drive under a bridge or wear my sunglasses.
|
07-22-2018, 12:45 PM | #9 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: floorboard dims
I have several extra front floors, give me a minute and I’ll get the measurements for you.
I’ll also post some pics |
07-22-2018, 01:00 PM | #10 |
Senior Member
Join Date: Nov 2015
Location: North Pole, Alaska
Posts: 2,651
|
Re: floorboard dims
It’s not flat by any means, but overall width is 43 1/2 inches, and from front to rear its 19 1/2 inches with a bend at approximately 9 inches measuring from the closest edge to the seat.
|
07-23-2018, 09:02 AM | #11 |
Senior Member
Join Date: Mar 2017
Location: Grandville, MI
Posts: 280
|
Re: floorboard dims
sorry i'm looking for the floor dimensions itself. My floor is a little buckled on the sides, and this is what I came up with. I was wondering if anyone had anything more accurate?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|