|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-12-2020, 05:21 PM | #1 |
Member
Join Date: Sep 2019
Location: Chicago Burbs
Posts: 46
|
Babbitt Work needed in IL. Anyone!?!
Just tore down my 29 motor to find out that the mains babbit is trashed.. Was wondering what something like this cost to do? Located in Joliet IL
Matt |
02-12-2020, 05:47 PM | #2 |
Senior Member
Join Date: Jul 2015
Location: SouthWest Michigan
Posts: 363
|
Re: Babbitt Work needed in IL. Anyone!?!
Call Rich at Antique engine rebuilders
Skokie Illinois Great guy Sent from my iPhone using Tapatalk |
Sponsored Links (Register now to hide all advertisements) |
|
02-12-2020, 08:00 PM | #3 |
Senior Member
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
|
Re: Babbitt Work needed in IL. Anyone!?!
AER does not do babbit, only inserts. Not a lot of people do it anymore.
__________________
"The more things change, the more they stay the same." |
02-12-2020, 10:23 PM | #4 |
Senior Member
Join Date: Jan 2012
Location: Tx
Posts: 502
|
Re: Babbitt Work needed in IL. Anyone!?!
I did have engine rebuilt by Aer 6 years ago and yes it was a insert but quality work. I sold the car 2 years ago.
|
02-12-2020, 10:33 PM | #5 |
Senior Member
Join Date: May 2010
Location: Between Seattle & Tacoma
Posts: 2,355
|
Re: Babbitt Work needed in IL. Anyone!?!
Where’s Kronke?
|
02-12-2020, 10:38 PM | #6 |
Senior Member
Join Date: May 2010
Posts: 2,604
|
Re: Babbitt Work needed in IL. Anyone!?!
Sponsored Links (Register now to hide all advertisements)
It is NOT an easy job ... experience counts Herm Konhke does very good babbit work for 52 years http://www.kohnkerebabbittingservice.com/our-story.html ADDRESS 60615 330th Ave Email: [email protected]Clare Iowa 50524 Phone #: 1-515-303-0363
Last edited by Benson; 02-13-2020 at 01:27 PM. |
02-13-2020, 03:36 AM | #7 |
Member
Join Date: Dec 2018
Location: Central Illinois
Posts: 70
|
Re: Babbitt Work needed in IL. Anyone!?!
Quite a few people in my model a club (central il) take theirs to Rons Machine Shop in Ohio.
|
02-13-2020, 08:05 AM | #8 |
Senior Member
Join Date: May 2010
Location: PA Poconos
Posts: 723
|
Re: Babbitt Work needed in IL. Anyone!?!
I strongly recommend Schwalm's Babbitted Bearings, Inc. In Strasburg, PA. 717-687-6976. They specialize in Model A engines and have years of experience. Flawless reputation. I had just had them do an engine for me.
|
02-13-2020, 08:49 AM | #9 |
Senior Member
Join Date: Jul 2018
Location: Spring Grove, Illinois
Posts: 1,371
|
Re: Babbitt Work needed in IL. Anyone!?!
Just my opinion: the industry is shifting away from babbit for several reasons: one, modern cars have inserts; two, inserts don't require as much special knowledge and equipment as babbit. But with that the inserts when damaged will fail right away as opposed to babbit which you might be able to limp home with. I would go with inserts, but if the rest of your babbit is OK, maybe that would be more cost effective. Though it is best to replace everything while you are in there.
__________________
"The more things change, the more they stay the same." |
02-13-2020, 09:27 AM | #10 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,534
|
Re: Babbitt Work needed in IL. Anyone!?!
Quote:
One or two thoughts to ponder. Properly cast bearings will typically last just as long, -if not longer than inserts will. The key here is ensuring the poured bearing material is of the proper composition and has been cast properly. Another misconception is that once an engine has been machined for inserts, a home hobbyist can replace the insert shells should an insert bearing fail. Unfortunately that is not been the case on my experience. If the bearing is spun within the cap or block, the cap must be line-bored again. If the block is damaged, then line-boring is not an option due to timing gear lash. If the crankshaft is damaged, it is generally not as easy to exchange crankshafts due to thrust clearances. |
|
02-13-2020, 11:48 AM | #11 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,807
|
Re: Babbitt Work needed in IL. Anyone!?!
Effingham Regrind still does Babbitt work. I have used them before and they do a great job. Located in Effingham, Illinois.
|
02-13-2020, 12:30 PM | #12 |
Senior Member
Join Date: May 2010
Posts: 2,604
|
Re: Babbitt Work needed in IL. Anyone!?!
|
02-13-2020, 12:36 PM | #13 |
Senior Member
Join Date: Jun 2010
Location: Temecula, CA
Posts: 4,095
|
Re: Babbitt Work needed in IL. Anyone!?!
I recommend Schwalm's, they do great work. I also agree with Brent as to longevity.
|
02-14-2020, 02:03 PM | #14 |
Senior Member
Join Date: Oct 2015
Location: Delaware
Posts: 263
|
Re: Babbitt Work needed in IL. Anyone!?!
I would also give a thumbs-up to Ora and the Schwalms folks. Great to work
with and I am satisfied with my rebuild. Maybe a distance to travel or ship, but worth the look or a phone call.. IMO/kb |
02-14-2020, 02:31 PM | #15 |
Senior Member
Join Date: Jul 2016
Location: Orangeville Illinois
Posts: 462
|
Re: Babbitt Work needed in IL. Anyone!?!
A lot of Rock-Ford-A's (Rockford IL) members have used
Lashelle Engine Restoration 1802 Crossroads Lane North 2 Freeport, IL 61032 (815) 821-3546 And I believe they have been very satisfied with Jim Lashelle's babbit work. It's nice to be within driving distance of the shop your using Perhaps someone who has worked with Jim will jump in. |
02-16-2020, 09:04 PM | #16 |
Member
Join Date: Sep 2019
Location: Chicago Burbs
Posts: 46
|
Re: Babbitt Work needed in IL. Anyone!?!
Thanks to all that replied!! What a great community here. I will look into a couple of these and see what cam be done. Thanks again!!
Matt |
|
|
Sponsored Links (Register now to hide all advertisements) |
|