Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 06-29-2020, 07:01 PM   #1
Phil
Senior Member
 
Phil's Avatar
 
Join Date: May 2010
Location: Bethany, Ok
Posts: 382
Default 34 cabriolet window regulators/ channels

Hi, I recently bought a 34 cabriolet started by my uncle. I have window regulators that I am not sure are correct for this car. Mac’s catalog list Regulators for 32/33 cabriolet and none for the 34. I would have thought 33/34 would be the same and 32 different. What is correct ? I have not found a source for the window channels (and a lot of other 34 cabriolet parts). Any thoughts?
Thanks, Phil.
Phil is offline   Reply With Quote
Old 06-30-2020, 06:12 AM   #2
Terry,OH
Senior Member
 
Terry,OH's Avatar
 
Join Date: May 2010
Posts: 4,751
Default Re: 34 cabriolet window regulators/ channels

Macs list reproduction parts since there is no reproduction for the 33-34 window regulator they do not list it. They do make mistakes, the 32 and 33 regulators are different. It would be good if you can post a photo or two of what you have. There are photos in the 38 Ford hardware book that is sold as a reproduction. The 35 cabriolet regulator is the same as the 33-34. The Cabriolet side windows are very heavy especially in 35 when they became larger this put a lot of strain on the regulator and many became broken. Years ago they were replaced but today you may have to repair, replacements are very hard to find.
Attached Images
File Type: jpg 33-35 Cabriolet RH window regulator 2.jpg (92.5 KB, 21 views)
File Type: jpg 33-35 Cabriolet RH window regulator.jpg (88.1 KB, 17 views)

Last edited by Terry,OH; 06-30-2020 at 06:26 AM.
Terry,OH is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 06-30-2020, 09:53 AM   #3
Phil
Senior Member
 
Phil's Avatar
 
Join Date: May 2010
Location: Bethany, Ok
Posts: 382
Default Re: 34 cabriolet window regulators/ channels

Sponsored Links (Register now to hide all advertisements)
Hi, thinks for the repay. I will talks and see if perhaps a misprint. I will take some pictures of what I have neither one match mounting holes in the doors thanks, Phil
Phil is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:32 AM.