The Ford Barn

RalphG · 03-10-2016, 01:13 PM

Looks like I am going to need wheel cylinders for the 52 Merc as well. Got the drivers side front cylinder apart today. After removing the badly stuck pistons and seals I found it has inch and 1/8 diameter. I may have been wrong but thought I looked up these parts a while back and it said one inch cylinders? I could be wrong. Anybody happen to have the correct wheel cylinder diameter for a 52 Merc(Canadian built) ?

51 MERC-CT · 03-10-2016, 01:43 PM

New one from NAPA specs. out at 1-1/8"

http://www.napaonline.com/napa/en/p/UBP18290_0220767563

RalphG · 03-10-2016, 01:48 PM

Sponsored Links (Register now to hide all advertisements)

Quote:

Originally Posted by 51 MERC-CT

New one from NAPA specs. out at 1-1/8"

http://www.napaonline.com/napa/en/p/UBP18290_0220767563

Ok , that checks out. And I like the price although I know it will be $20 or more this far North. I need to pull a rear cylinder off now to be sure. A quick random search on rock auto says the rear cylinders are 15/16ths diameter.

03-10-2016, 01:43 PM	#2
51 MERC-CT Senior Member Join Date: May 2010 Location: East Hartford, Ct Posts: 5,898	Re: 52 Wheel Cylinders New one from NAPA specs. out at 1-1/8" http://www.napaonline.com/napa/en/p/UBP18290_0220767563 __________________ DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES