|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
05-20-2015, 07:58 PM | #1 |
Junior Member
Join Date: Jun 2010
Posts: 14
|
Tom & Purdy - Brake adjustment
I use your method for adjusting the front brakes ( it is quite easy to remove the pin from the brake rod clevice) but I can't remove the pin from the rear clevice rods. I am on my back like a contortionist and I just can't remove the pin. Is there a simpler way - is a lift necessary?
I must be doing something wrong and your advice would be appreciated. |
05-20-2015, 08:02 PM | #2 |
BANNED
Join Date: May 2010
Location: Bucks County, PA
Posts: 11,454
|
Re: Tom & Purdy - Brake adjustment
what about removing it off the service brake shaft? thats where the adjustment is also
for stubborn pins i use a side cutters / dykes to get under the pin head and pry out Last edited by Mitch//pa; 05-20-2015 at 08:08 PM. |
Sponsored Links (Register now to hide all advertisements) |
|
05-20-2015, 08:39 PM | #3 |
Senior Member
Join Date: May 2010
Location: Mpls, MN
Posts: 27,582
|
Re: Tom & Purdy - Brake adjustment
Sponsored Links (Register now to hide all advertisements)
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|