|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
04-26-2016, 01:45 PM | #1 |
Senior Member
Join Date: Sep 2014
Location: Wiscasset, Maine
Posts: 1,982
|
1932 exhaust pipe hangers?
Hi,
Looks like there is no source for 32 exhaust/tailpipe hangers, at least that I can find. Has anyone used later year hangers successfully? The one that would be perhaps the hardest is the one that mounts on the rear frame cross-member, adjacent to the hole for the pipe. Thanks |
04-26-2016, 03:47 PM | #2 |
Senior Member
Join Date: Oct 2011
Location: Shelton, WA
Posts: 3,800
|
Re: 1932 exhaust pipe hangers?
At one time Mike McKinnett in OR reproduced the entire exhaust system both early and later, including hangers. Not sure of the spelling of his last name, might be McKennett. I think his shop is in Gresham Or.
|
Sponsored Links (Register now to hide all advertisements) |
|
04-26-2016, 04:27 PM | #3 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,104
|
Re: 1932 exhaust pipe hangers?
Your second spelling of Mike's name is correct. The address of his business, Restorations and Reproductions, has a Portland street address. I'm pretty sure that not a single piece of his outstanding exhaust system reproductions remains, but no harm in asking.
While it is a bit of sin to do so, it is pretty easy to modify an easier-to-find '33-'34 tailpipe hanger (at the rear cross member) to create the '32 version. |
04-26-2016, 06:07 PM | #4 |
Senior Member
Join Date: Sep 2014
Location: Wiscasset, Maine
Posts: 1,982
|
Re: 1932 exhaust pipe hangers?
|
04-26-2016, 08:30 PM | #5 |
Senior Member
Join Date: May 2010
Location: northern Indiana
Posts: 1,618
|
Re: 1932 exhaust pipe hangers?
Glenn, I have some exhaust hangers that might be 32 ford. Do you have a sourec for a picture or someway for me to tell if what I have is what you need? Paul in Indiana
__________________
Unspoken gratitude is helpful to no one. |
04-26-2016, 08:37 PM | #6 |
Senior Member
Join Date: Sep 2014
Location: Wiscasset, Maine
Posts: 1,982
|
Re: 1932 exhaust pipe hangers?
Sponsored Links (Register now to hide all advertisements)
I can't send a picture until after Mother's Day. I'll then be able to send a picture from The 32 Ford book that I have. From memory, it clamps around the tailpipe just in front of the hole for the same and has a rubber biscuit and bolts to a hole adjacent to the large hole for the pipe. Appreciate you replying! Regards, Glenn |
04-26-2016, 08:52 PM | #7 |
Senior Member
Join Date: Oct 2010
Location: Hancock, MA
Posts: 2,786
|
Re: 1932 exhaust pipe hangers?
are you talking v=8 or 4?
__________________
Short URL: http://smu.gs/14g7eDW |
04-26-2016, 09:51 PM | #8 |
Senior Member
Join Date: May 2010
Location: northern Indiana
Posts: 1,618
|
Re: 1932 exhaust pipe hangers?
Glenn, here is what I have. It came to me in a box of original 32 ford parts i bought from an older guy 10 years ago. Paul
__________________
Unspoken gratitude is helpful to no one. |
04-26-2016, 11:11 PM | #9 |
Senior Member
Join Date: May 2010
Location: southeastern Michigan
Posts: 10,104
|
Re: 1932 exhaust pipe hangers?
Paul,
While not the '32 hanger in question, it could easily be made into one as its "tail" is more than long enough. That's what I've had to resort to of late. Jim, The hanger (clamp/bracket) at the rear cross member is common for both fours and V8s. |
04-27-2016, 08:07 AM | #10 |
Senior Member
Join Date: Oct 2011
Location: CT.
Posts: 596
|
Re: 1932 exhaust pipe hangers?
A couple of different versions I have made over the past few years. They were on hot rods so did not have to look like originals. But they are made of stainless steel.
__________________
A man should do what he thinks best! "The Duke" |
04-27-2016, 08:39 AM | #11 |
Senior Member
Join Date: Sep 2014
Location: Wiscasset, Maine
Posts: 1,982
|
Re: 1932 exhaust pipe hangers?
Very nice. I've used those torca clamps on motorcycles before and they're very good.
|
04-27-2016, 01:03 PM | #12 |
Senior Member
Join Date: May 2010
Location: State Center IA
Posts: 166
|
Re: 1932 exhaust pipe hangers?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|