|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-09-2016, 07:42 PM | #1 |
Senior Member
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,771
|
Condenser troubles?
I had the distributer out and got worrying about the condition of the condenser. It is a 46-8 dist.
The dist was rebuilt in???? I bought a new condenser and now the car dies after about an hour of running. Let it sit 5 minutes and it fires instantly. I can put the maybe 60 year old condenser back in or maybe there is a good new one someone would recommend. It ran flawlessly until I fixed it. Maybe it is not the condenser but it seems suspicious as that was the only thing changed. Thoughts?? |
10-09-2016, 09:12 PM | #2 |
Senior Member
Join Date: May 2010
Location: Oshkosh, Wi
Posts: 4,527
|
Re: Condenser troubles?
If the old one worked, reinstall it.
|
Sponsored Links (Register now to hide all advertisements) |
|
10-10-2016, 06:35 AM | #3 |
Senior Member
Join Date: May 2010
Posts: 4,751
|
Re: Condenser troubles?
Jim Lindner (Bubba) sells a magneto condenser that has worked flawlessly in my car for years. NAPA sells a replacement also.
|
10-10-2016, 09:47 AM | #4 |
Senior Member
Join Date: Jun 2010
Location: San Antonio, Texas
Posts: 16,436
|
Re: Condenser troubles?
Condensers are so simple but that doesn't mean the manufacturers will make one that's worth a damn. Unfortunately, this is the modern reality and I don't run into too many folks that haven't come to this conclusion. I buy three just to hopefully get one good one.
|
10-10-2016, 09:50 AM | #5 |
Senior Member
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,771
|
Re: Condenser troubles?
I put my 60 year old one back on. I will buy a NAPA one for a spare.
|
10-10-2016, 09:55 AM | #6 |
Senior Member
Join Date: May 2010
Location: Columbia, SC
Posts: 1,579
|
Re: Condenser troubles?
Sponsored Links (Register now to hide all advertisements)
|
10-10-2016, 10:07 AM | #7 |
Senior Member
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,771
|
Re: Condenser troubles?
If it does it again, I will try another coil. It is a late model type coil.
|
10-10-2016, 05:37 PM | #8 |
Senior Member
Join Date: May 2010
Location: SPEEDWAY INDIANA
Posts: 4,148
|
Re: Condenser troubles?
The 42 - 46 condensor is usually niot as big a issue as the earlier ones.
NAPA makes a good quality replacement for this distributor.... |
10-10-2016, 06:50 PM | #9 |
Senior Member
Join Date: May 2010
Location: Kerrville, Tx
Posts: 2,771
|
Re: Condenser troubles?
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|