Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 02-08-2024, 06:44 AM   #1
Martinbuilt
Member
 
Join Date: Nov 2022
Location: Near Pittsburgh
Posts: 77
Default Quick measurement needed, '29 Coupe or Tudor

I'm piecing together a sport coupe.
My subrails were torch cut in the front, so I need to make some repairs.
If you have one of these cars, can you measure the door opening?
Distance between the A and B pillars. At the sill, and maybe at the latch?
Thanks
Martinbuilt is offline   Reply With Quote
Old 02-08-2024, 10:28 AM   #2
wrndln
Senior Member
 
Join Date: May 2010
Location: Lakeville, MN
Posts: 5,165
Default Re: Quick measurement needed, '29 Coupe or Tudor

I have a 28 special coupe that is identical to all 29 coupes as far as the door openings are concerned. The measurement from the A pillar to the B pillar at the bottom is 27 1/2". The measurement just above the latch pocket is 28 1/16". Hope this helps.
Rusty Nelson
wrndln is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 02-08-2024, 12:47 PM   #3
Martinbuilt
Member
 
Join Date: Nov 2022
Location: Near Pittsburgh
Posts: 77
Default Re: Quick measurement needed, '29 Coupe or Tudor

Sponsored Links (Register now to hide all advertisements)
Thanks very much. I would not have guessed those two measurements to be different.
I'll have to try and cobble it all together and see if I can hang the doors..
Martinbuilt is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 03:45 PM.