|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
09-18-2019, 08:51 AM | #21 |
Senior Member
Join Date: Oct 2013
Posts: 110
|
Re: Building a Travel Toolkit
A small VOM
sent from my Key Board |
09-18-2019, 08:53 AM | #22 |
Senior Member
Join Date: Oct 2015
Location: Bay City Michigan
Posts: 1,050
|
Re: Building a Travel Toolkit
I really like the home depot 6in1 screwdriver. It gives you 1/4in 5/16 and 4 screwdriver tips. very convenient to put in pocket or tool belt on a job.
These are a few things I have beyond whats listed. And there are things up list im going to add. channel locks vise grip 2lb hammer real big screwdriver 6n1 screw driver large crecent small crecent line man pliers(they always have a good cutter on them) needle nose pliers punch chisel tiny carb screw driver a handfull of nuts couple bolts short but sturdy tow rope a small roll of electrical wire |
Sponsored Links (Register now to hide all advertisements) |
|
09-18-2019, 10:24 AM | #23 |
Senior Member
Join Date: May 2010
Location: Cape Cod MA
Posts: 2,840
|
Re: Building a Travel Toolkit
I am an old timer with Model A driving and for many years carried a condenser as my spare parts, and my tools were a jack and a screwdriver. I gradually morphed into carrying more spare parts and I have helped others with them, and never needed more than a condenser for my own car.
Let me tell you a story. I got a phone call one day from a female asking me if I had a generator available. I said yes and in a few hours she appeared. She was a hippie type with a rather run down appearing Fordor. I asked her how far she had driven with the generator not working. Her reply was MONTANA. I then asked how many times she charged the battery and she said once, near Chicago. She parked at night on hills to coast and start or she cranked it. She did not drive at night. She had Model A common sense. She visited her mother on the Cape and left for Tennessee. The next time I saw her, months later, the Fordor was smashed in the rear. She was driving back from Tennessee and on the New Jersey Turnpike she got rear ended by a semi. She was towing a U Haul trailer carrying her mothers furniture to the Cape which absorbed most of the damage and trailer and contents were totaled. The car was still running and free of mechanical problems but the rear of the body had extensive damage. The last time I saw her she was leaving to return to Montana in the car. |
09-18-2019, 10:51 AM | #24 |
Senior Member
Join Date: Oct 2013
Posts: 110
|
Re: Building a Travel Toolkit
A small VOM
sent from my keyboard |
09-18-2019, 02:15 PM | #25 |
Senior Member
Join Date: Oct 2014
Location: Santa Cruz Ca.
Posts: 175
|
Re: Building a Travel Toolkit
I have my "bag" I put in any vehicle I drive. It contains those all in one tools they keep coming out with. They really do help in an emergency. Including bailing wire and duct tape. I guess I'm just old fashioned Boy Scout "Be Prepared"
|
09-18-2019, 02:26 PM | #26 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,911
|
Re: Building a Travel Toolkit
Sponsored Links (Register now to hide all advertisements)
Quote:
I almost lost my cookies on that one. Lol! Sent from my iPhone using Tapatalk |
|
09-18-2019, 03:22 PM | #27 |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,911
|
Re: Building a Travel Toolkit
|
09-18-2019, 06:12 PM | #28 |
Senior Member
Join Date: Aug 2010
Location: Port Orchard, WA
Posts: 1,498
|
Re: Building a Travel Toolkit
Here is a list I made several years ago, it is broken down in three lists, tools, parts, and supplies with an code for location, TB (tool box), T (trunk), US (under seat), and the blanks are for item NOT included this trip.
__________________
1931 160B & 1931 68B If you don't have time to do it right the 1st time, how do you have time to do it the 2nd time? |
09-18-2019, 06:19 PM | #29 | |
Senior Member
Join Date: May 2019
Location: Westford, MA
Posts: 195
|
Re: Building a Travel Toolkit
Quote:
That story tells me that my club members are OK. These cars are difficult to break. Can I ask around what year that story took place. Thanks you !!! |
|
09-18-2019, 06:42 PM | #30 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,911
|
Re: Building a Travel Toolkit
Quote:
Awesome! Sent from my iPhone using Tapatalk |
|
09-18-2019, 10:50 PM | #31 |
Senior Member
Join Date: Jan 2016
Posts: 2,113
|
Re: Building a Travel Toolkit
Wow 160, you don't mess around when it comes to travel kits. Good for you.
|
09-19-2019, 12:32 PM | #32 |
Senior Member
Join Date: May 2010
Location: Long Island, NY
Posts: 3,492
|
Re: Building a Travel Toolkit
I carry all of this in a tool box mounted between the front frame rails:
☐Abrasive Papers ☐Axle Hub Gasket (2) ☐Axle Keys (2) ☐Cable Ties ☐Clamp (2) ☐Coil, 12V Internal Resistor ☐Coil Hi-V Wire Terminal ☐Coil Hi-V Wire ☐Condenser OEM ☐Condenser, Modern (2) ☐Cotter Pin Pick ☐Crank & Lug Nut Wrench ☐Crimper, Wire Termini ☐Cyl Head Eye Bolts (2) ☐Distributor, Rebuilt ☐Distributor Body ☐Distributor Cap ☐Drum Puller ☐Duct Tape ☐Extension 3/8 x 3 ☐Extension 3/8 x 6 ☐Feeler Gage ☐File, Rat Tail ☐Flashlight, LED ☐Float Valve Shim Set ☐Gasket Paper ☐Gasket Scrapper ☐Gasket, A Water Pump ☐Gloves ☐Grease, 2 Ounces ☐Grease, Die-Electric ☐Hammer, Ball Peen ☐Hardware Assortment ☐Ignition Point Posts (2) ☐Ignition Point Set, OEM (2 ☐Ignition Point Set, Modern ☐Insurance Policy ☐Jack & Handle ☐Knife, Utility ☐Magnet, Telescoping ☐Marker, Black Sharpie ☐Mirror ☐Nut Drivers 3/16, 1/4, 5/16 ☐Nut Drivers 11/32, 3/8 ☐Nut Drivers 7/16, 1/2 ☐Paint Brush 2 ☐Pin, Valve Stem ☐Pliers ☐Pliers, Diagonal ☐Pliers, Needle Nose ☐Pliers, Vise Grips 7 ☐Pliers, Water Pump ☐Putty Knife 2 ☐Rags (3) ☐Ratchet 3/8 Drive x 6 ☐Ratchet 3/8 Swivel Head ☐Rod, Plastic ☐Rope, 32 ☐RTV Silicone, Tube ☐Scissors ☐Scotch Brite Cloth ☐Screw Driver, Offset ☐Screw Driver, Phillips ☐Screw Driver-Holder 1/8 ☐Screw Driver 1/4 ☐Screw Driver 1/4 Short ☐Screw Driver 5/16 ☐Screw Driver, Large ☐Shims, Rear Axle (2) ☐Silicone Sealer ☐Socket Adapter 1/4 to 3/8 ☐Socket Adapter 3/8 to 1/2 ☐Socket Adapter 1/2 to 3/8 ☐Socket 3/8Dr x 3/8 ☐Socket 3/8Dr x 7/16 ☐Socket 3/8Dr x 1/2 ☐Socket 3/8Dr x 9/16 ☐Socket 3/8Dr x 5/8 ☐Socket 3/8Dr x 11/16 ☐Socket 3/8Dr x 3/4 ☐Socket, Timing Gear Nut ☐Spark Plug TT10 ☐Spark Plug Gap Tool ☐Stop Leak, Barrs ☐Tape, Electrical ☐Test Light, Coil ☐Test Light, Hi-Voltage ☐Rain-X ☐Rotor ☐Timing Gear ☐Timing Pin w Key Ring ☐Tire Irons (2) ☐Tube Patch Kit ☐Tube Valve Service Tool ☐Tube Valve Puller ☐Tooth Brush ☐Towels, Micro-Fiber (3) ☐Towels, Paper ☐Towel, Terry Cloth ☐Valve Guide Driver ☐Water, 1 Gallon ☐Water Pump, A ☐Wheel Bearing Set, Front ☐Wheel Bearing, Rear ☐Wire AWG 16 x 24 ☐Wire Brush ☐Wire Hangar ☐Wire Strippers ☐Wrench, Adjustable 4 ☐Wrench, Adjustable 10 ☐Wrench, Brake Adjusting ☐Wrench, Box 1-1/8 ☐Wrench 1/4 ☐Wrench 3/8 ☐Wrench 7/16 ☐Wrench 1/2 ☐Wrench 9/16 ☐Wrench 5/8 ☐Wrench 11/16 ☐Wrench 3/4 ☐Wrench, Car Jets ☐Wrench Set, Allen ☐Wrench, Nu Rex Timing I carry a cylinder head gasket & blankets in the bustle behind the rear seat.
__________________
Bob Bidonde |
09-20-2019, 08:51 AM | #33 |
Member
Join Date: Nov 2016
Location: Corrupt-A -Cut Eastern,Ct
Posts: 54
|
Re: Building a Travel Toolkit
Electrial tape
|
05-03-2020, 07:31 AM | #34 | |
Senior Member
Join Date: Sep 2016
Location: Roanoke, VA USA
Posts: 1,911
|
Re: Building a Travel Toolkit
Quote:
Recently, I've been working to replace my leaking radiator, and, yes, I have found some Phillips screws, along with some *metric* nuts. After all these years, you never know what you will find in the car until you need to take it apart. |
|
05-03-2020, 07:50 AM | #35 |
Senior Member
Join Date: Apr 2015
Location: Saint Cloud Mn
Posts: 745
|
Re: Building a Travel Toolkit
Small flat blade screwdriver for readjusting points when needed.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|