Go Back   The Ford Barn > General Discussion > Model A (1928-31)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 05-29-2023, 10:38 AM   #21
Fhane
Senior Member
 
Fhane's Avatar
 
Join Date: May 2010
Location: Stuart Florida
Posts: 149
Default Re: Balancing Beads

I have been selling balance beads and installing beads for years and they will balance a tire and maybe masks some other front end problems. Trucks, Corvettes, motor cycles and Model As. Never had a complaint. Only once did I have a problem. It was a fire truck. Evidently the stems had some blockage and would not receive the beads. If in doubt gently stick a wire down the stem and check for blockage. One word of caution. On tubeless type tires be careful. If you get a flat and use some type of slime or one oft the sticky tire plugs you will have a problem. The beads will stick to the gooey stuff and really throw you out of balance. Tubeless tires should be patched from the inside with a proper patch.
Fhane is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 12:10 AM.