The Ford Barn

Cody_1948 · 06-07-2014, 09:48 PM

https://www.youtube.com/watch? v=Obr4TBTNHrk&feature=yout ube_gdata_player

Spent thee day working on the old truck with my good friend and fordbarn member Ken Krans who drove an hr too help and bring me parts and i had parts for him, Him, my best friend chris and myself changed out the carb, gas pump, and changed afew more things around ... Its getting better and better took it for a ten 10min drive around the dirt roads I love this truck, with the help of chris him and i put in the rear glass that ken hooked me up with

one thing before i forget one of the screws on the bottom of the carb is leaking out gas can i used Peramtex on thr screw too stop the leak ?
Thks guys and thk you ken for everything

Cody_1948 · 06-07-2014, 09:50 PM

Try video again

https://www.youtube.com/watch?v=Obr4...e_gdata_player

gearhead1952 · 06-07-2014, 10:31 PM

Sounds good.

Lawson Cox · 06-07-2014, 10:48 PM

Sweet.

Ken Crans · 06-08-2014, 07:13 AM

I love that truck..Glad to be of help. wont be long now to have it on the road!

B-O-B · 06-08-2014, 11:18 AM

Sponsored Links (Register now to hide all advertisements)

You should be able to replace the gaskets on the bottom & check for any burrs . This will most likely stop the leaks. I wouldn't use permatex even if it would work.
I almost feel asleep laying on my side to watch your video. heh heh he

06-07-2014, 09:48 PM	#1
Cody_1948 Senior Member Join Date: Sep 2011 Location: MI Posts: 211	Busy day on the 48 F1, video Thks Ken https://www.youtube.com/watch? v=Obr4TBTNHrk&feature=yout ube_gdata_player Spent thee day working on the old truck with my good friend and fordbarn member Ken Krans who drove an hr too help and bring me parts and i had parts for him, Him, my best friend chris and myself changed out the carb, gas pump, and changed afew more things around ... Its getting better and better took it for a ten 10min drive around the dirt roads I love this truck, with the help of chris him and i put in the rear glass that ken hooked me up with one thing before i forget one of the screws on the bottom of the carb is leaking out gas can i used Peramtex on thr screw too stop the leak ? Thks guys and thk you ken for everything

06-07-2014, 09:50 PM	#2
Cody_1948 Senior Member Join Date: Sep 2011 Location: MI Posts: 211	Re: Busy day on the 48 F1, video Thks Ken Try video again https://www.youtube.com/watch?v=Obr4...e_gdata_player Last edited by Cody_1948; 06-07-2014 at 09:56 PM.

06-07-2014, 10:31 PM	#3
gearhead1952 Senior Member Join Date: May 2010 Location: Julesburg, Colorado Posts: 714	Re: Busy day on the 48 F1, video Thks Ken Sounds good.

06-07-2014, 10:48 PM	#4
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: Busy day on the 48 F1, video Thks Ken Sweet. __________________ Life is like a roll of toilet paper. The closer to the end, the faster it goes. It is better to be seen, than viewed. "We sleep safe in our beds because rough men stand ready in the night to visit violence on those who would do us harm".

06-08-2014, 07:13 AM	#5
Ken Crans Senior Member Join Date: May 2010 Location: Highland,MI Posts: 1,196	Re: Busy day on the 48 F1, video Thks Ken I love that truck..Glad to be of help. wont be long now to have it on the road!

06-08-2014, 11:18 AM	#6
B-O-B Senior Member Join Date: May 2010 Location: Ft Mohave,Az Posts: 1,987	Re: Busy day on the 48 F1, video Thks Ken Sponsored Links (Register now to hide all advertisements) You should be able to replace the gaskets on the bottom & check for any burrs . This will most likely stop the leaks. I wouldn't use permatex even if it would work. I almost feel asleep laying on my side to watch your video. heh heh he