|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
01-24-2012, 09:18 AM | #1 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
1940 Convertible Windshield Garnish Moldings & Rear Seat
City:
Stoney Creek
State:
Ontario, Canada
Looking for front windshield inside garnish moldings for my 1940 Ford Convertible.
Fiberglass ones or ones made from a '40 closed car or '40-47 pickup okay. Thanks Dave [email protected] Last edited by ratrodtrux; 03-22-2013 at 07:46 PM. |
01-31-2012, 09:12 AM | #2 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt
thanks dave |
Sponsored Links (Register now to hide all advertisements) |
|
02-05-2012, 10:56 AM | #3 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Bttt
thanks dave |
02-05-2012, 05:40 PM | #4 |
BANNED
Join Date: May 2010
Location: Sonoma,Calif.
Posts: 877
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
You can make the interior garnish moulding pretty easily from '40 truck moldings. You have to make 2 cuts in each one to make it work. The rear seat springs are available from Snyder's. I bought 2 sets last year. They did a good job on mine. The rear springs are pretty $$$.
|
02-06-2012, 03:38 AM | #5 |
Senior Member
Join Date: May 2010
Posts: 220
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
the closed car moldings are different on the ends that go to the center. the countersunk screw hole spacing is different. the radius at the bottom is different. the height is about 1/2" higher than the conv. the center molding is completely different. station wagons are same as conv.
|
02-15-2012, 09:56 AM | #6 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Sponsored Links (Register now to hide all advertisements)
thanks dave |
03-04-2012, 10:30 PM | #7 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Bttt thanks Dave
|
03-05-2012, 10:19 PM | #8 |
MEMBER EMERITUS
Join Date: May 2010
Location: New Zealand
Posts: 1,380
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
40-47 pickup garnish moldings are a close fit & can be altered to suit.
regards, Chris.NZ. |
03-06-2012, 10:26 AM | #9 |
Senior Member
Join Date: May 2010
Location: North Las Vegas,Nv/Rainier,Or
Posts: 450
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
I'm needing both items as well.I have some pickup mouldings,so will try making them fit.I called Snyder,and they are spendy.I'm also needing the driver's door side garnish moulding.
__________________
Milt/Las Vegas |
03-06-2012, 10:29 AM | #10 |
Senior Member
Join Date: May 2010
Location: North Las Vegas,Nv/Rainier,Or
Posts: 450
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
I thought the truck mouldings were the same as a closed car.
__________________
Milt/Las Vegas |
03-06-2012, 09:09 PM | #11 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
hey milt: the 40-47 truck & 40 closed car garnish moldings will work but i am told they are 1/2 to 3/4" too tall, the only extra convertible parts i have are a driver's side door glass stainless & a no draft for the same side i think
thanks dave |
03-08-2012, 10:41 AM | #12 |
Senior Member
Join Date: May 2010
Location: North Las Vegas,Nv/Rainier,Or
Posts: 450
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Dave,I found that the p/u mouldings were too tall for a closed car.I have p/u mouldings in my coupe,and they didn't fit exactly.The chrome shop(went out of business)gave me someone else's mouldings.
__________________
Milt/Las Vegas |
06-06-2012, 08:56 AM | #13 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
TTT
i know the moldings can be made but if anyone has some made-up or even some fiberglass ones from downs etc. standard height, not chopped, i'm not in a hurry, also still need rear seat or just reasonably priced top/bottom rear seat springs. i've either sold/traded any of my spare convertible parts except for the top parts, i have extra side irons etc but have to check all my top stuff over thoroughly. Thanks Dave |
06-15-2012, 10:25 AM | #14 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt thanx Dave
|
06-21-2012, 08:00 AM | #15 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt please
thanx dave |
06-28-2012, 08:15 AM | #16 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt please
thanx Dave |
07-06-2012, 10:29 AM | #17 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanx Dave |
07-14-2012, 11:06 AM | #18 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanx Dave |
07-22-2012, 12:04 PM | #19 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
07-27-2012, 08:31 AM | #20 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
08-03-2012, 09:40 PM | #21 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
08-07-2012, 01:38 PM | #22 |
Junior Member
Join Date: Jun 2011
Posts: 5
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Treehouse Woods in Cocoa Beach, Florida has the mouldings in fiberglass. They are the same as a woody.
|
Sponsored Links (Register now to hide all advertisements) |
|
08-07-2012, 02:00 PM | #23 |
Senior Member
Join Date: May 2010
Posts: 232
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Cy Bergman in Ohio phone # 937-295-2793
I bought a set off of Cy at Hershey about 8 yrs ago. He was making them at that time and they fit like a glove. Not sure he is still above ground tho. |
08-18-2012, 11:55 AM | #24 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
08-26-2012, 12:41 PM | #25 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanx Dave |
09-29-2012, 03:48 PM | #26 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Sponsored Links (Register now to hide all advertisements)
Thanks Dave |
10-11-2012, 08:37 AM | #27 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
10-20-2012, 09:43 AM | #28 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
11-23-2012, 10:09 AM | #29 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
12-07-2012, 09:12 PM | #30 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
12-13-2012, 12:40 PM | #31 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
12-16-2012, 01:24 PM | #32 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
12-20-2012, 09:44 AM | #33 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave Happy Holidays! |
12-23-2012, 12:16 PM | #34 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave Happy Holidays |
01-03-2013, 09:33 AM | #35 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave Happy New Year! |
01-09-2013, 11:13 AM | #36 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
01-13-2013, 12:10 PM | #37 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
01-20-2013, 11:50 AM | #38 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
01-24-2013, 09:36 AM | #39 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
02-02-2013, 11:30 AM | #40 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
02-09-2013, 09:55 AM | #41 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
02-17-2013, 01:55 PM | #42 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
Sponsored Links (Register now to hide all advertisements) |
|
03-02-2013, 11:22 AM | #43 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
03-10-2013, 01:36 PM | #44 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
03-17-2013, 02:25 PM | #45 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
03-22-2013, 07:46 PM | #46 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Sponsored Links (Register now to hide all advertisements)
Thanks Dave |
03-27-2013, 09:43 AM | #47 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
03-31-2013, 11:35 AM | #48 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
04-06-2013, 08:33 PM | #49 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
04-21-2013, 07:19 PM | #50 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
05-20-2013, 10:12 AM | #51 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
06-02-2013, 08:38 AM | #52 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
08-07-2013, 08:32 AM | #53 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
08-11-2013, 08:23 AM | #54 |
Member
Join Date: Feb 2011
Location: Southern Ontario
Posts: 99
|
Re: 1940 Convertible Windshield Garnish Moldings & Rear Seat
Ttt Please
Thanks Dave |
|
|
Sponsored Links (Register now to hide all advertisements) |
|