|
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
![]() |
Thread Tools | Display Modes |
![]() |
#1 |
Junior Member
Join Date: Sep 2022
Location: Habana,cuba
Posts: 25
|
![]()
Hi everyone, this is Juan from Cuba . Been restoring this convertible but have a few arms from top mechanism missing. I don't Even know where the hydraulic Cylinders are bolted to the irons, need a picture for that. Also need measurements for the arms I Will be making from scratch out of a piece of metal since I don't have other options. Thanks in advance for any help
|
![]() |
![]() |
![]() |
#2 |
Junior Member
Join Date: Sep 2022
Location: Habana,cuba
Posts: 25
|
![]()
This all I have and the cylinders.need measurements for whatever is missing
|
![]() |
![]() |
Sponsored Links (Register now to hide all advertisements) |
|
![]() |
#3 |
Senior Member
Join Date: May 2010
Location: Oregon
Posts: 1,307
|
![]()
I hope this helps
Karl |
![]() |
![]() |
![]() |
#4 |
Junior Member
Join Date: Sep 2022
Location: Habana,cuba
Posts: 25
|
![]()
It help a lot, thanks You so much. However i still need as Mich measurements as posible of arms 50330,50312,and50306. need to know distances betweenholes ,thickness and possibly angle of the 3 hole.i Will fabricate those parts and couldnot find one in the 2 other Cars like mine that still survive on the roads in Cuba
|
![]() |
![]() |
![]() |
#5 |
Senior Member
Join Date: Dec 2010
Location: Gold Coast , Australia
Posts: 249
|
![]()
Hi Falomara,
here are some pics that may help assembly regards Dave |
![]() |
![]() |
![]() |
#6 |
Junior Member
Join Date: Sep 2022
Location: Habana,cuba
Posts: 25
|
![]() Sponsored Links (Register now to hide all advertisements)
|
![]() |
![]() |
![]() |
#7 |
Junior Member
Join Date: Sep 2022
Location: Habana,cuba
Posts: 25
|
![]()
These highlighted parts are the ones I need to get measurements from Bolt to Bolt. Probably also need angle between them . I know I AM bothering too much but I desperately need that info to finish My 3 year project. Thanks to everyone who took their time to read and SEE how they could help.
|
![]() |
![]() |
![]() |
#8 |
Senior Member
Join Date: Dec 2010
Location: Gold Coast , Australia
Posts: 249
|
![]()
Unfortunately I cant give you patterns or angles on these as the car is now complete and no access to the main pivot bar.
The centre to centre measurements I have from when I had them apart. 1. 360 mm 2. 462 mm 3. 317mm |
![]() |
![]() |
![]() |
#9 |
Junior Member
Join Date: Sep 2022
Location: Habana,cuba
Posts: 25
|
![]()
Thanks a million!!!!! This información willhelp enormously and Will make things esasier
Last edited by falomara; 09-25-2022 at 01:09 PM. Reason: Wrong word |
![]() |
![]() |
![]() |
#10 |
Senior Member
Join Date: Jul 2014
Location: Iowa
Posts: 1,634
|
![]()
The most difficult part of restoring a convertible top is finding the special bolts that join the sections. They are eccentric, and the top can't be adjusted to fit without them. When I restored my '47, we had to make them in a machine shop, no supplier had them using the
diagrams in the 1944-1952 body parts manual. It is available from C&G (800) 266-0470. Ask for V-44 $52. It is essential to understand the parts for your car. |
![]() |
![]() |
![]() |
#11 |
Junior Member
Join Date: Sep 2022
Location: Habana,cuba
Posts: 25
|
![]()
I know I AM bothering too much but was wondering if You could send me a template of the parts highlighted un red(#1)50330. I tried making calculations from the pictures but nothing good came out. There is a business in Hialeah, Fl that can send it to me in Cuba . You send tobthem by mail . If necessary I can someone un Fl pay You for the service and for mailing expenses. I honestly need that and I Will forever appreciate ir. My email: [email protected]
|
![]() |
![]() |
![]() |
#12 |
Junior Member
Join Date: Sep 2022
Location: Habana,cuba
Posts: 25
|
![]()
Hello everyone!!! A very kind member justo mailed a template of part 50330(highlighted in red) .that Will be a very valuable contribution to My project...
Please , need the other 2. I Will appreciate any effort You make. The shipping business in Hialeah Will send it to Cuba as soon as they receive . The template can be Made in thin paper ,it doesnt have to be thick cardboard sso it fits better in a regular envelope. Thanks in advance . [email protected]. |
![]() |
![]() |
![]() |
|
|
Sponsored Links (Register now to hide all advertisements) |
|