02-11-2012, 03:16 PM | #41 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
56 custom
oh no! mr bill! i'll post one of my pic's when i stop laughing. your's is as grungy as mine. LOOKOUT '56! when i posted my pic's i had soreheads getting pretty nasty because nobody could see anything. ok. so far it does look like mine. that's good! this has been worth waiting for! Have A Nice Day!
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
02-11-2012, 03:26 PM | #42 |
Senior Member
Join Date: Jun 2011
Posts: 149
|
Re: 1960 f100 with 292 yblock which auto trans to use?
So mine is a cruis o matic?
|
Sponsored Links (Register now to hide all advertisements) |
|
02-11-2012, 03:29 PM | #43 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56 custom
BEFORE you disconnect anything! where do the 2 cooler lines WITH TRANS FLUID IN THEM go to? mine has 3 fittings on passenger side of main case. 2 upfront by bellhousing HI and LO. 1 at rear of main case LO. all 3 on the passenger side! Have A Nice Day!
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
02-11-2012, 03:32 PM | #44 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56 custom
to answer your 'pointing at question' hang on let me look at your pic's again. does it come out of front HI? i went out and looked at mine. Have A Nice Day!
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote Last edited by all american boy; 02-11-2012 at 03:37 PM. |
02-11-2012, 03:50 PM | #45 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56 custom
so far, yes. it looks like cruisomatic. i am trying to help you here. save you time in the end. does the line you pointed at come from front HI? Have A Nice Day!
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
02-11-2012, 03:51 PM | #46 |
Senior Member
Join Date: Jun 2011
Posts: 149
|
Re: 1960 f100 with 292 yblock which auto trans to use?
Sponsored Links (Register now to hide all advertisements)
|
02-11-2012, 03:59 PM | #47 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56
on passenger side. 2 fittings on mine AT FRONT are 'ONE ABOVE THE OTHER' that gives a HI and a LO one. 1 fitting at back is all by it's lonesome and LO (low on case, near bottom) is pointed at tube coming out of FRONT HI (high) fitting/tapped hole? bob
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
02-11-2012, 04:08 PM | #48 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56
here's pic of mine. one line on the left and two on the right. two on the right. one is 'upper' and one is 'lower' where does your line you pointed to go to? bob
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
02-11-2012, 04:31 PM | #49 |
Senior Member
Join Date: Jun 2011
Posts: 149
|
Re: 1960 f100 with 292 yblock which auto trans to use?
I will have to check on it
|
02-11-2012, 11:19 PM | #50 |
Senior Member
Join Date: May 2010
Location: Boonville MO
Posts: 104
|
Re: 1960 f100 with 292 yblock which auto trans to use?
AAB,
If the transmission in your 64 is original to that vehicle,it's a COM.The two fittings on the side are for cooler lines.The fitting on the lower rear is for a vacuum modulator.The modulator screws into that fitting and a vacuum line runs from there to an outlet on the intake manifold of the engine. 56 Ford Custom, The FOMs did not have a vacuum modulator.An air cooled FOM would not have any fittings on the case for cooling lines.FOMs made after mid-56 do have fittings for cooler lines,but not for a modulator.
__________________
Paul H. Last edited by Paul H; 02-11-2012 at 11:21 PM. Reason: Forgot a word |
02-12-2012, 03:20 AM | #51 |
Senior Member
Join Date: Jun 2011
Posts: 149
|
Re: 1960 f100 with 292 yblock which auto trans to use?
Thats some good info. I would really like to know what my two transmissions are. So ai get get this truck and car put together.
|
02-12-2012, 03:56 AM | #52 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56
how about saying which fitting the line you were pointing to goes to? if it goes to either one of front 2 fittings and which one, upper or lower? bob
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
02-12-2012, 04:15 AM | #53 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56
after you find which fitting the line you pointed to goes to do this: 1 the two lines on TOP of cooler are are the fluid lines. they SHOULD go to the REMAINING 2 fittings on side of trans. 2 now you clean trans 3 take off cooler and trans lines and water lines. you're not putting them back on. 4 get 2 brass barbs from napa and 2 feet of black fuel hose. 5 put the barbs in the 2 TRANS FLUID fittings. bypass the trans cooler for now. 6 put the engine and trans back in truck. 7 get a trans temp gauge from napa drill a hole in trans pan. put the sender in. 8 drill a hole in floor 9 put the gauge on a rag on the floor Have A Nice Day!
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
02-12-2012, 04:18 AM | #54 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56
monday morning you call Charlytranny.com http://www.charlietranny.com/ ask him if your tranny will stay in safe temperature range with TRUCK TRANS COOLER W/WATER LINES removed & bypassed. also ask him if fuel line will hold trans line pressure. the extra line left over i'm 90% sure is VENT. Have A Nice Day!
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote Last edited by all american boy; 02-12-2012 at 04:38 AM. |
02-12-2012, 04:33 AM | #55 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56
about that truck trans cooler i read that is to WARM THE TRANS UP! it's for when the temperature is 10 degrees outside. engine water will get warmer faster than trans fluid. i live in california so bye-bye to that warmer/cooler on my trans. your truck will drive with the bypass. i guarantee you that you can test that tranny w/bypass hose setup. if you want to put trans warmer/cooler back on later. go for it! Have A Nice Day!
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
02-12-2012, 09:55 AM | #56 |
Senior Member
Join Date: Jun 2011
Posts: 149
|
Re: 1960 f100 with 292 yblock which auto trans to use?
So if im going to be gettubg rid of it should I use the other trans?
|
02-12-2012, 11:20 AM | #57 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56
just leave the warmer/cooler off. use the transmission you've posted pic's of. you're ready to put it all back together! bob
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
02-12-2012, 11:30 AM | #58 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56
i would clean tranny real good. i figure you have a pressure washer. gunk and a hose with good water pressure will work. for this get 4 or 6 cans. use GUNK BRAND-ORIGINAL FORMULA.CHECK CAN BEFORE YOU BUY. let the gunk do the work. soak grunge real good. leave it for 10-20 min. come back and spray it. bob
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
02-12-2012, 12:04 PM | #59 |
Senior Member
Join Date: Jun 2011
Posts: 149
|
Re: 1960 f100 with 292 yblock which auto trans to use?
Im sorry if I seem slow. Its just I have nno idea how to bypass or not use this cooler or warmer. Im nervous about doing that. I dont want to mess anything up.
|
02-12-2012, 12:12 PM | #60 |
Senior Member
Join Date: Nov 2011
Location: Podunk Junction, U.S.A.
Posts: 622
|
Re: 1960 f100 with 292 yblock which auto trans to use?
'56
not at all. follow cooler lines from warmer/cooler to fittings. draw yourself a little picture. where two lines go in tranny. doesn't matter which is pump out & return. then you're ready to START CLEANING! before you put tranny back in hook up 2 feet of hose. bob
__________________
'Has racing made you a millionare?' 'Yes it has.Before I was a multi-millionaire.'-Quote |
|
|
Sponsored Links (Register now to hide all advertisements) |
|