|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-06-2022, 06:16 AM | #41 | |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,485
|
Re: Body to Frame Mounts
Quote:
Below is an ILL of the mounts giving torque values. I do not know the source as Jwahite (1956 SW) included it in one of his earlier posts (2018) describing his ordeal. |
|
03-06-2022, 11:06 AM | #42 |
Senior Member
Join Date: Mar 2018
Location: Arkansas
Posts: 525
|
Re: Body to Frame Mounts
[QUOTE=KULTULZ;2110581]If you made that ILL, you are a man of many talents ...
Thanks for the torques specs. Many talents bwaaahahahahaha. |
Sponsored Links (Register now to hide all advertisements) |
|
03-06-2022, 05:37 PM | #43 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,485
|
Re: Body to Frame Mounts
OK ... The ILL posted above is a partial scan from the 1955 WSM (NOV 1954 - Pg. 195) so the torque values will be correct (1956 should be the same as JW has a 1956 WSM). I will try to scan the complete ILL and post it.
|
04-04-2022, 11:47 AM | #44 |
Senior Member
Join Date: Mar 2018
Location: Arkansas
Posts: 525
|
Re: Body to Frame Mounts
It is done. Broke the #10 drivers side loose finally. The rest of them went easy. Loosened both sides then removed the drivers side first. Jacked it up and laid on a few 2x4s. Then wire brushed the mounts and installed new pads. Tightened it down to 20 ft pounds and done, I hope.
|
04-04-2022, 12:55 PM | #45 |
Senior Member
Join Date: Aug 2012
Location: IN A 'GALAXIE' FAR FAR AWAY
Posts: 6,485
|
Re: Body to Frame Mounts
She's going to ride like a CADILLAC ... er ... LINCOLN
__________________
***** We should have a contest. The player has to start at the very last post of a thread & then try to guess what the OP's original question was about ... |
07-01-2022, 09:52 PM | #46 |
Senior Member
Join Date: Mar 2013
Location: Kent, WA. Tucson, AZ
Posts: 1,398
|
Re: Body to Frame Mounts
Sponsored Links (Register now to hide all advertisements)
|
12-30-2023, 07:39 PM | #47 |
Junior Member
Join Date: Dec 2023
Location: Edmonds, WA
Posts: 10
|
Re: Body to Frame Mounts
The acetone/ATF combo is the best penetrant I’ve found yet.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|