|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
06-06-2014, 11:43 PM | #1 |
Senior Member
Join Date: May 2010
Location: Windsor California
Posts: 492
|
1936 Metal toe board ? Anyone have info ?
A friend of mine came up with a metal toe board for his 36 . The seller said it was an original part ??? I have never seen or heard of this . The part is very nice and fits perfectly . Anyone have any more info ??
|
06-07-2014, 12:54 AM | #2 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,835
|
Re: 1936 Metal toe board ? Anyone have info ?
I have the mirror image of that exact item in my 35 [RHD], Now, how rare is that? Actually the panel that fits between the pedals and starter button, and retains the rubber seals, held in place with three 1/4" screws, differs from that used on the more common plywood floorboard. I think this item came into production sometime during the 1936 production year; maybe 35? As with all things early Ford, there is always going to be variations to the theme.
__________________
Unfortunately, two half wits don't make a whole wit! |
Sponsored Links (Register now to hide all advertisements) |
|
06-07-2014, 03:11 AM | #3 |
Senior Member
Join Date: May 2010
Location: tasmania
Posts: 221
|
Re: 1936 Metal toe board ? Anyone have info ?
my 35 has this same board rhd I was told early 35 ,I don't know
|
06-07-2014, 04:55 AM | #4 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,859
|
Re: 1936 Metal toe board ? Anyone have info ?
They were used in early '35's here on our LHD. I have two early all original '35's that have those sheet metal toe boards on drivers side only. I see them quite often at swap meets. They are covered in the EFV-8 Clubs 1935 - 36 Book authored by Don Rogers.
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
06-07-2014, 07:48 AM | #5 |
Senior Member
Join Date: May 2013
Location: Pa.
Posts: 2,174
|
Re: 1936 Metal toe board ? Anyone have info ?
My '35 has a wood board on the passenger side and metal on driver's side. Both look to be original and are in the same condition as the rest of the floor ( good ). Metal available for both sides.
__________________
Nomad |
06-07-2014, 07:58 PM | #6 |
Senior Member
Join Date: May 2010
Location: Minnesota
Posts: 1,138
|
Re: 1936 Metal toe board ? Anyone have info ?
Sponsored Links (Register now to hide all advertisements)
|
06-12-2014, 07:55 PM | #7 |
Senior Member
Join Date: Dec 2010
Location: Port St Lucie Florida
Posts: 398
|
Re: 1936 Metal toe board ? Anyone have info ?
My 36 has the wood one.......I want the metal one...are they available ? Never saw one before now.
|
06-12-2014, 11:32 PM | #8 |
Senior Member
Join Date: Aug 2010
Location: McMinnville, TN
Posts: 2,327
|
Re: 1936 Metal toe board ? Anyone have info ?
All my 35's are early and have the metal LH board.. One has a metal RH board too
|
06-13-2014, 04:55 AM | #9 |
Senior Member
Join Date: Jan 2012
Location: New Jersey
Posts: 1,427
|
Re: 1936 Metal toe board ? Anyone have info ?
My early '35 Coupe has the same.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|