04-30-2016, 03:43 PM | #1 |
Senior Member
Join Date: May 2010
Location: Iron River Wi
Posts: 172
|
Need HELP...
i bought new rear drums for my ccpu im rebuilding, new bearings and hubs. i cant get them to push on far enough to start the nue on the axle, drum turns but wont go any farther.... Im at a loss, turning for your help.. thanks Pete
|
04-30-2016, 03:49 PM | #2 |
Senior Member
Join Date: May 2010
Location: Portland, Oregon
Posts: 5,906
|
Re: Need HELP...
Do you have new brake linings as well? And have you backed the brakes off as far as you can?
__________________
Ray Horton, Portland, OR As you go through life, keep your eye on the donut, not the hole. |
Sponsored Links (Register now to hide all advertisements) |
|
04-30-2016, 03:51 PM | #3 |
Senior Member
Join Date: May 2010
Location: Southern California
Posts: 7,032
|
Re: Need HELP...
Pete,
Something funny is going on. How about some pictures? Did you do anything other than replace the bearing and hubs before you found the problem? Do you still have the old ones to compare? Are you sure the axle key is not hanging up? Charlie Stephens |
04-30-2016, 03:51 PM | #4 |
Senior Member
Join Date: May 2010
Location: Iron River Wi
Posts: 172
|
Re: Need HELP...
yes new lineings as well, i can move the shoes with my fingers so i know its not hanging up on them.
|
04-30-2016, 03:52 PM | #5 |
Senior Member
Join Date: May 2010
Location: Iron River Wi
Posts: 172
|
Re: Need HELP...
new key also and seals
|
04-30-2016, 03:53 PM | #6 |
Senior Member
Join Date: Oct 2010
Location: Grafton, MA
Posts: 1,226
|
Re: Need HELP...
Sponsored Links (Register now to hide all advertisements)
|
04-30-2016, 03:53 PM | #7 |
Senior Member
Join Date: May 2010
Location: Iron River Wi
Posts: 172
|
Re: Need HELP...
I'll try it with out the key just to see
|
04-30-2016, 03:56 PM | #8 |
Senior Member
Join Date: Oct 2010
Location: Grafton, MA
Posts: 1,226
|
Re: Need HELP...
One more thought -sometimes the e-brake linings are too thick and need to be sanded down (suggest you wear a mask when doing so) so that the drum will fit over them. I had to do this recently when replacing the e-brake shoes/linings.
|
04-30-2016, 11:37 PM | #9 | |
Senior Member
|
Re: Need HELP...
Quote:
Full set Standard, Bratton's Part #: 2610 Full set Thick, Bratton's Part #: 2650
__________________
What's right about America is that although we have a mess of problems, we have great capacity - intellect and resources - to do some thing about them. - Henry Ford II |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|