|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
02-14-2022, 06:30 PM | #1 |
Junior Member
Join Date: Jun 2020
Location: Prince George BC Canada
Posts: 11
|
Sending unit removal 36 coupe
Climbing in my rumble and closing the lid to access the sending unit in my coupe Is a lot of fun! Not.
Can the sender be removed in the car? |
02-14-2022, 07:14 PM | #2 |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,646
|
Re: Sending unit removal 36 coupe
The rumble seat can easily be removed. Lift the front edge and pull forward to clear the seat back, then lift out.
__________________
Alan |
Sponsored Links (Register now to hide all advertisements) |
|
02-14-2022, 07:14 PM | #3 |
Senior Member
Join Date: May 2010
Location: San Tan Valley, Arizona
Posts: 211
|
Re: Sending unit removal 36 coupe
Yes, as you open the lid, when the lid is almost vertical, there will be a gap between the lid and the rear of the body. You can access the sending unit by sliding a not too fat arm and hand down in the gap. Not easy but I have done it several times. Bring your patience!
__________________
Wayne |
02-14-2022, 07:21 PM | #4 | |
Senior Member
Join Date: Jul 2011
Location: SF Bay Area
Posts: 6,646
|
Re: Sending unit removal 36 coupe
Quote:
That works, but you need to hold the lid steady with one hand if you really want to keep the other.
__________________
Alan |
|
02-14-2022, 07:57 PM | #5 |
Junior Member
Join Date: Jun 2020
Location: Prince George BC Canada
Posts: 11
|
Re: Sending unit removal 36 coupe
The point I was really trying to make was can the sending unit be removed and replaced through the access hole?
|
02-14-2022, 08:05 PM | #6 |
Senior Member
Join Date: May 2010
Location: San Tan Valley, Arizona
Posts: 211
|
Re: Sending unit removal 36 coupe
Sponsored Links (Register now to hide all advertisements)
__________________
Wayne |
02-14-2022, 08:07 PM | #7 |
Junior Member
Join Date: Jun 2020
Location: Prince George BC Canada
Posts: 11
|
Re: Sending unit removal 36 coupe
Thank you!
|
02-14-2022, 10:20 PM | #8 |
Senior Member
Join Date: May 2010
Location: Melbourne Australia.
Posts: 2,079
|
Re: Sending unit removal 36 coupe
If your fuel gauge is playing up then you should do some testing to make sure the gauge and wiring is OK before going to the trouble of removing the tank sender. Just guessing is not the way to go. Regards, Kevin.
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|