The Ford Barn

Rustyspokes · 07-25-2010, 05:01 PM

Putting a Grill on a 34 ford, what size are the 4 Bolts that are used in the grill to Rad support at the top where the Rad cap goes , thanks Barners ..

Lawson Cox · 07-25-2010, 05:07 PM

Not sure of size but Roy Nacewicz sells them in a kit. He sells all the nuts and bolts you need, correct style, size and finish. He also has many of the wooden pieces for these old fords we love. 734-654-9450. Great fellow to deal with.

fordcpe · 07-25-2010, 07:42 PM

Been a while but I think they are # 12 you will find # 10 all over the place but 12 are harder to find Darrell

Rustyspokes · 07-25-2010, 11:40 PM

Thanks guys... I'll get some # 12 , the correct finish..

Richard (EV8G) · 07-26-2010, 08:44 AM

They are #12-24 oval-head, slotted I think???

Bruce Lancaster · 07-26-2010, 11:53 AM

Sponsored Links (Register now to hide all advertisements)

34128-s7 nut...12-24 (3/16 x 1/2) square nut
34804-s2 lockwasher, details not in the catalog I have at hand.
Screw not listed because I am using a late catalog with lots of gaps...
anyway, get a 1934 catalog AND a '28-48, as they will list out most of the hardware and hand you the sizes right after the parts the fasteners fit. The right year one will usually have all the detail parts that dropped out of the book by '48.
The parts catalogs are just too useful not to have.

Lawson Cox · 07-26-2010, 08:52 PM

Quote:

Originally Posted by Richard (EV8G)

They are #12-24 oval-head, slotted I think???

I don't think an oval head would be used at this location. Pan head most likely.

Rustyspokes · 07-26-2010, 09:15 PM

Quote:

Originally Posted by Bruce Lancaster

34128-s7 nut...12-24 (3/16 x 1/2) square nut
34804-s2 lockwasher, details not in the catalog I have at hand.
Screw not listed because I am using a late catalog with lots of gaps...
anyway, get a 1934 catalog AND a '28-48, as they will list out most of the hardware and hand you the sizes right after the parts the fasteners fit. The right year one will usually have all the detail parts that dropped out of the book by '48.
The parts catalogs are just too useful not to have.

Hi Bruce... What is the name of the catalogue company you are using , tks ... Da.

Bruce Lancaster · 07-27-2010, 11:32 AM

You need an original Ford type catalog...most are reproduced, and available from the usual Ford parts places like C&G Ford.
I would want a 1934 catalog (the most detail, and all proper parts) and a '28-48 which will show range of interchange and later substitute parts. Most but not all parts have the hardware called out below the part and a "standard" parts list in the back so you can decode what length and head type and so on. There is so much info buried in the catalogs I can't imagine working without them, they are as vital as the service bulletins.

07-25-2010, 05:07 PM	#2
Lawson Cox Senior Member Join Date: May 2010 Location: Above the gnat line in Georgia Posts: 7,009	Re: 34 Grill to Rad bolts Four of them What Bolt and thread size Not sure of size but Roy Nacewicz sells them in a kit. He sells all the nuts and bolts you need, correct style, size and finish. He also has many of the wooden pieces for these old fords we love. 734-654-9450. Great fellow to deal with.

07-25-2010, 07:42 PM	#3
fordcpe Member Join Date: May 2010 Location: Lasalle Ontario Canada Posts: 94	Re: 34 Grill to Rad bolts Four of them What Bolt and thread size Been a while but I think they are # 12 you will find # 10 all over the place but 12 are harder to find Darrell

07-25-2010, 11:40 PM	#4
Rustyspokes Senior Member Join Date: May 2010 Location: West Coast Canada B.C. Interior Posts: 332	Re: 34 Grill to Rad bolts Four of them What Bolt and thread size Thanks guys... I'll get some # 12 , the correct finish..

07-26-2010, 08:44 AM	#5
Richard (EV8G) Senior Member Join Date: May 2010 Location: La Verne CA Posts: 432	Re: 34 Grill to Rad bolts Four of them What Bolt and thread size They are #12-24 oval-head, slotted I think??? __________________ Early V8 Garage Pasadena Roadster Club

07-26-2010, 11:53 AM	#6
Bruce Lancaster Member Emeritus Join Date: May 2010 Location: Madison, NJ Posts: 5,230	Re: 34 Grill to Rad bolts Four of them What Bolt and thread size Sponsored Links (Register now to hide all advertisements) 34128-s7 nut...12-24 (3/16 x 1/2) square nut 34804-s2 lockwasher, details not in the catalog I have at hand. Screw not listed because I am using a late catalog with lots of gaps... anyway, get a 1934 catalog AND a '28-48, as they will list out most of the hardware and hand you the sizes right after the parts the fasteners fit. The right year one will usually have all the detail parts that dropped out of the book by '48. The parts catalogs are just too useful not to have.

07-25-2010, 05:01 PM	#1
Rustyspokes Senior Member Join Date: May 2010 Location: West Coast Canada B.C. Interior Posts: 332	34 Grill to Rad bolts Four of them What Bolt and thread size Putting a Grill on a 34 ford, what size are the 4 Bolts that are used in the grill to Rad support at the top where the Rad cap goes , thanks Barners ..

07-27-2010, 11:32 AM	#9
Bruce Lancaster Member Emeritus Join Date: May 2010 Location: Madison, NJ Posts: 5,230	Re: 34 Grill to Rad bolts Four of them What Bolt and thread size You need an original Ford type catalog...most are reproduced, and available from the usual Ford parts places like C&G Ford. I would want a 1934 catalog (the most detail, and all proper parts) and a '28-48 which will show range of interchange and later substitute parts. Most but not all parts have the hardware called out below the part and a "standard" parts list in the back so you can decode what length and head type and so on. There is so much info buried in the catalogs I can't imagine working without them, they are as vital as the service bulletins.