|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
03-20-2020, 01:49 AM | #1 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
My wife hates crankshafts...
So in theese days i thought you may need a laugh...
When iīm to busy running around in the shop loosing track of time my sweet wife usually comes down with a cup of coffee and a cookie and tells me time to sit down... So she did yeasterday to...but a customer dropped a crankshaft outside the door and she tripped on it and coffee was history...strike one. So back up to the house she went and got a fresh cup for me...this time avoiding the cranky trap outside the entrance...all well that far Then chatting with me for a while she manage to bump into another crank in the shop...and gravity makes the crank and her foot go on a date she didnīt apreciate...now my daily coffee is seriously threatened... Ended up her foot was fine with a few scratches but she loudly stated that there will be a clean up and safety improvement before any more deliveries So iīm on clean up duty in the weekend |
03-20-2020, 05:41 AM | #2 |
Senior Member
Join Date: May 2010
Location: Chester Vt
Posts: 8,862
|
Re: My wife hates crankshafts...
I wonder if you have any of the 53 Shrll molded ones? I've only seen a few of them. Ford converted their crankshaft castings to a "Shell molding process" for the Y block. I;ve had several one de stroked to 3 5/8 small journal. Wonder if they ever made any 4" cranks using this method.
|
Sponsored Links (Register now to hide all advertisements) |
|
03-20-2020, 06:12 AM | #3 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,859
|
Re: My wife hates crankshafts...
That looks like a crankshaft obstacle course It's a wonder to me how she was ever able to deliver any coffee and cookies in the past without tripping
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
03-20-2020, 08:10 AM | #4 |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,015
|
Re: My wife hates crankshafts...
It hurt a little but just last week I threw a number of nice prewar cranks away. I got tired of looking at them and no one seemed to want them for just the cost of shipping.
__________________
"I can explain it for you. However, I can't understand it for you". |
03-20-2020, 08:15 AM | #5 |
Senior Member
Join Date: May 2010
Location: Southern Illinois
Posts: 3,795
|
Re: My wife hates crankshafts...
|
03-20-2020, 09:48 AM | #6 |
Senior Member
Join Date: Jul 2010
Location: 36 miles north of Albany NY
Posts: 2,954
|
Re: My wife hates crankshafts...
Sponsored Links (Register now to hide all advertisements)
|
03-20-2020, 11:33 AM | #7 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: My wife hates crankshafts...
The crankshaft rack is pretty full to...
And the ones on the floor is on their way to be ground and then out the door...itīs just my pace that is not keeping up Steel toes for the wife sounds scary...i know where they will make a mark |
03-20-2020, 12:02 PM | #8 |
Senior Member
Join Date: Dec 2013
Location: Minnesota, Florida Keys
Posts: 10,321
|
Re: My wife hates crankshafts...
OH NO! Now you've done it! We're probably gonna get into the vertical vs. horizontal crankshaft storage discussion again.
|
03-20-2020, 12:28 PM | #9 |
Senior Member
Join Date: Sep 2013
Location: Florida
Posts: 588
|
Re: My wife hates crankshafts...
I'd lay all those on an angle just to be safe.
__________________
Do I look like I have a plan B? |
03-20-2020, 12:40 PM | #10 |
Senior Member
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,115
|
Re: My wife hates crankshafts...
Didn't I hear that you have some sort of new "shiny" layin' around? DD |
03-20-2020, 03:31 PM | #11 |
Senior Member
Join Date: Apr 2015
Location: Sweden
Posts: 3,045
|
Re: My wife hates crankshafts...
Cranks get stacked in every way around here
OlīRon i still have a few EAB replacement cranks that have the different parting lines from casting...you need one destroked/stroked of choice itīs yoursas a sign of apreciation for years of guidance !! |
03-20-2020, 03:44 PM | #12 |
Senior Member
Join Date: Sep 2013
Location: Florida
Posts: 588
|
Re: My wife hates crankshafts...
Yep. Hopin' to take a closer look at that thing this weekend.
__________________
Do I look like I have a plan B? |
03-20-2020, 05:05 PM | #13 |
Senior Member
Join Date: Jun 2012
Location: Long Island,NY
Posts: 1,555
|
Re: My wife hates crankshafts...
Flathead, I feel you wife's pain. In December, I just finished putting the motor in my Model A. I was disassembling the hoist and took the bolt from the end of the piston and was balancing the top beam on my shoulder. I was just about to remove the rear bolt and the piston assembly swung down and landed directly on my big toe. If the ram was out 4", it would have missed and if it was retracted 1", it would have also missed. My toe was in the exact place that it shouldn't be. Off to the emergency room and x-rays showed the end of the bone broken off. Accidents happen!
|
03-20-2020, 05:12 PM | #14 |
Senior Member
Join Date: May 2010
Location: Qld, Australia
Posts: 4,223
|
Re: My wife hates crankshafts...
Yes, last week a friend dropped over a rusty 8ba, so to get it off his pickup we used my abby hoist,Like a dunce I was only wearing my sandals and while manoeuvring the hoist and engine inside my shed my toes went under a wheel on the hoist ,lucky on a big bruise
Lawrie |
03-20-2020, 08:10 PM | #15 |
Senior Member
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,836
|
Re: My wife hates crankshafts...
Murre, you're lucky she only hates crankshafts; my wife hates all my 'crap'. She wouldn't bring a coffee out to my shed, rather she'll yell out from the safety of the house that's coffee's made, and I must go fetch!
__________________
Unfortunately, two half wits don't make a whole wit! |
03-20-2020, 08:56 PM | #16 |
Senior Member
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,859
|
Re: My wife hates crankshafts...
Seth, I can almost feel your pain.... I'm betting that amongst those trashed prewar crankshafts was the one you'd been searching high and low for, for such a long time, and finally just gave up hope of ever finding one
__________________
John "Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein |
03-20-2020, 09:23 PM | #17 | |
Senior Member
Join Date: May 2010
Location: Wa.
Posts: 5,409
|
Re: My wife hates crankshafts...
Quote:
Picture this. A friend of mine had a crank grinding shop in the 60's. His store room was about 20 x 30 ft. 2 aisles down the long way. Concrete floor. 300 plus cranks neatly stood on end in rows so they could be easily reached from the aisles. Some of these cranks are big ones like D8 and D9 Cat and EMD locomotive crank sections. A VERY large type earthquake comes along. Every one fell over and only 50% were salvageable due to dink marks in the journals. (the ultimate domino game and he saw the whole thing) By the way, Mure, my crank rack looks just like yours except it has no cranks in it right now and my wife won't bring me coffee but she WILL bring me a beer at 1700. |
|
03-20-2020, 09:28 PM | #18 |
Senior Member
Join Date: May 2010
Location: Snohomish,WA
Posts: 1,030
|
Re: My wife hates crankshafts...
She can always bring me coffee and cookies. I promise to practice “social distancing” and clean up my stray crankshafts
|
03-21-2020, 01:30 AM | #19 |
Senior Member
Join Date: May 2010
Location: MN
Posts: 7,053
|
Re: My wife hates crankshafts...
when you build a building, build it to what you need then add 30%.
|
03-21-2020, 10:09 AM | #20 | |
Senior Member
Join Date: May 2010
Location: Wisconsin, USA
Posts: 9,015
|
Re: My wife hates crankshafts...
Quote:
We are both driven to achieve perfection in our respective hobbies. So, although vastly different (hobbies) the drive is identical.
__________________
"I can explain it for you. However, I can't understand it for you". |
|
|
|
Sponsored Links (Register now to hide all advertisements) |
|