|
Sponsored Links (Register now to hide all advertisements) |
|
|
Thread Tools | Display Modes |
10-07-2017, 01:40 PM | #1 |
Senior Member
Join Date: Oct 2014
Location: Kentucky
Posts: 502
|
Truck stall when coming to a stop
I know this has been covered a lot but it has me baffled. Truck has been doing fine no problem nice idle and never died when braking to a stop.
Lately it was doing it once in awhile now it does it every time! Even with clutch in braking to a stop sign and she just drops off. Idle mixture I have adjusted several time and no change. So why now? Is the float sticking? Made no changes internally to the Zenith Thanks |
10-07-2017, 01:53 PM | #2 | |
Senior Member
Join Date: May 2010
Location: Eastern Tennessee
Posts: 11,519
|
Re: Truck stall when coming to a stop
Quote:
. |
|
Sponsored Links (Register now to hide all advertisements) |
|
10-07-2017, 03:28 PM | #3 |
BANNED
Join Date: May 2017
Posts: 16
|
Re: Truck stall when coming to a stop
I had a bad ignition switch and every time i hit the brake it shut off
|
10-07-2017, 04:24 PM | #4 |
Senior Member
Join Date: Dec 2011
Location: Country Victoria Australia
Posts: 130
|
Re: Truck stall when coming to a stop
Go through and clean out the carb. After that clean out the sediment bowl and when doing so check for water in the bottom of the bowl. None of the gaskets have deteriorated have they? Dave
|
10-07-2017, 04:24 PM | #5 |
Senior Member
|
Re: Truck stall when coming to a stop
Tighten your carb connection to the manifold. If not there, somewhere you have a leak in the intake system.
|
10-07-2017, 04:52 PM | #6 |
Senior Member
Join Date: Oct 2014
Location: Kentucky
Posts: 502
|
Re: Truck stall when coming to a stop
Sponsored Links (Register now to hide all advertisements)
|
10-10-2017, 07:14 AM | #7 |
Senior Member
Join Date: Oct 2014
Location: Kentucky
Posts: 502
|
Re: Truck stall when coming to a stop
Tore carb down soaked cleaned passages and jets. light junk in mid well and idle passages. Works fine now. Thanks for your suggestions.
|
10-10-2017, 07:55 AM | #8 |
Senior Member
Join Date: May 2010
Location: POUGHKEEPSIE NY 12601
Posts: 1,016
|
Re: Truck stall when coming to a stop
This is why I love the Ford Barn Thanks Ryan!
__________________
|
10-11-2017, 07:20 AM | #9 |
Senior Member
Join Date: Dec 2010
Location: FRESNO, CA
Posts: 12,560
|
Re: Truck stall when coming to a stop
It's quite common for Zeniths to stall, on a QUICK, HARD stop! That's why Henry redesigned the Float Chamber!
Bill W.
__________________
"THE ASSISTANT GURU OF STUFF" |
|
|
Sponsored Links (Register now to hide all advertisements) |
|