Go Back   The Ford Barn > General Discussion > Late V8 (1954+)

Sponsored Links (Register now to hide all advertisements)

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
Old 10-05-2019, 09:42 AM   #1
tommyleea
Senior Member
 
Join Date: Jul 2016
Location: Missouri
Posts: 424
Default 272 oiling issues

I am aware of the top end oiling problems on the 272, however, I am stumped. I removed the distributor from my engine to manually spin the oil pump, and check the oiling. Engine is in the truck. I connected a direct pressure oil pressure gauge. I get oil pressure from 20 to 60 psi, but I don't see any oiling at the rocker shafts. I have tried this numerous times. Rotated the engine by hand to see if that would change things, but no luck. I assume there should be some sort of oiling at the rocker shafts, although it may be minimal. Any thoughts, ideas, suggestions? Thanks for any help. Truck has been sitting for a long period. Oil is fresh.
tommyleea is offline   Reply With Quote
 


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 07:53 PM.