04-21-2017, 04:39 PM | #1 |
Senior Member
Join Date: May 2010
Location: San Diego,Ca
Posts: 1,377
|
Coupling shaft
City:
San Diego
State:
Ca
I am still seeking a coupling shaft that was used on a 28-29 Double A truck, it is the shaft between the transmission and the main drive shaft, where a Hi-Low reduction box was used, but not factory fitted.
My intensions are to install a Mitchell transmission with 15% improved 1st- 2nd gears, and remove the Hi-Lo unit, I am hoping someone may have a coupling laying around that they wish to dispose of,---- in addition a u-joint with 6-10 splines that has the replaceable cross in any condition as long as the knuckles are not worn would be helpful. Thank for looking.
__________________
Nothing can be made foolproof, ---- fools are ingenious bastards. |
04-26-2017, 02:54 PM | #2 |
Senior Member
Join Date: May 2010
Location: San Diego,Ca
Posts: 1,377
|
Re: Coupling shaft
Back to the top.
__________________
Nothing can be made foolproof, ---- fools are ingenious bastards. |
Sponsored Links (Register now to hide all advertisements) |
|
05-06-2017, 02:30 PM | #3 |
Senior Member
Join Date: May 2010
Location: San Diego,Ca
Posts: 1,377
|
Re: Coupling shaft
Upwards
__________________
Nothing can be made foolproof, ---- fools are ingenious bastards. |
05-12-2017, 04:01 PM | #4 |
Senior Member
Join Date: May 2010
Location: San Diego,Ca
Posts: 1,377
|
Re: Coupling shaft
To the top again
__________________
Nothing can be made foolproof, ---- fools are ingenious bastards. |
05-25-2017, 08:24 AM | #5 |
Senior Member
Join Date: May 2010
Location: San Diego,Ca
Posts: 1,377
|
Re: Coupling shaft
Sponsored Links (Register now to hide all advertisements)
__________________
Nothing can be made foolproof, ---- fools are ingenious bastards. |
|
|
Sponsored Links (Register now to hide all advertisements) |
|