The Ford Barn

Smitty · 03-23-2019, 04:58 AM

Hi All,
Anyone have experience with Hempy Cooper pouring fixture?
Thanks, Steve

KR500 · 03-24-2019, 05:09 PM

Hempy- Cooper pouring jigs have been used successfully for years. They made pouring jigs for the "T", "A", "B", and "V-8s". Also made were pouring jigs for all the other babbitted rods that autos had. Will post some photos at a later date. Ammco ( Automotive Machinery Company) purchased Hempy-Cooper in the mid 1930's I believe and still marketed all their products. Very sought after jigs on the internet.

Smitty · 03-24-2019, 10:44 PM

It seems as though it could be a nice way to pour then get the fixture off quickly and pein, interesting design.

KR500 · 03-30-2019, 12:31 AM

Sponsored Links (Register now to hide all advertisements)

Here are some photos of Hempy Cooper products

03-23-2019, 04:58 AM	#1
Smitty Senior Member Join Date: May 2010 Location: Boston North Shore Posts: 752	Hempy Cooper Hi All, Anyone have experience with Hempy Cooper pouring fixture? Thanks, Steve

03-24-2019, 05:09 PM	#2
KR500 Senior Member Join Date: Mar 2012 Location: Addison,ll. Posts: 454	Re: Hempy Cooper Hempy- Cooper pouring jigs have been used successfully for years. They made pouring jigs for the "T", "A", "B", and "V-8s". Also made were pouring jigs for all the other babbitted rods that autos had. Will post some photos at a later date. Ammco ( Automotive Machinery Company) purchased Hempy-Cooper in the mid 1930's I believe and still marketed all their products. Very sought after jigs on the internet.

03-24-2019, 10:44 PM	#3
Smitty Senior Member Join Date: May 2010 Location: Boston North Shore Posts: 752	Re: Hempy Cooper It seems as though it could be a nice way to pour then get the fixture off quickly and pein, interesting design.