The Ford Barn

1931SWA · 01-16-2017, 11:59 AM

Does any out there have parts for multi disc clutch? I'm restoring a June 5th, 1928 roadster p/up. I'd like to keep it as close as possible to the way it was built. I have the correct pedals, small shaft, trans, bell housing.

KGBnut · 01-16-2017, 12:52 PM

Where are you located? I have a spare transmission I might be willing to part with. It has the big castle nut on the input shaft indicating that it was from a multi-disc. I've heard that with a few modifications it can be be used with my single-disc...but, I may be better off to get one that doesn't need modifications.

Ron in Quincy · 01-16-2017, 01:29 PM

Sponsored Links (Register now to hide all advertisements)

I have all the modified parts, AR Bell Housing, AR Transmission, AR Flywheel Cover, and cut down regular Flywheel that weights 37 pounds including ring gear. I made the same conversion on my very early Sport Coupe. When installed the conversion, from outside appearance, you would think the "A" has a multi-disc clutch.

The parts would be too heavy to ship so they would have to be picked up at my home in Northern California.

The cost for the parts is $1,025.00.

If interested, send me a PM. I have pictures I can send you of the modified parts.

Note: the Flywheel has been balanced and is tapped for a V8 pressure plate; only thing required is the pressure plate and clutch disc.

01-16-2017, 11:59 AM	#1
1931SWA Junior Member Join Date: Feb 2011 Posts: 8	Multi disc clutch Does any out there have parts for multi disc clutch? I'm restoring a June 5th, 1928 roadster p/up. I'd like to keep it as close as possible to the way it was built. I have the correct pedals, small shaft, trans, bell housing.

01-16-2017, 12:52 PM	#2
KGBnut Senior Member Join Date: Jul 2011 Location: Southwestern Connecticut Posts: 931	Re: Multi disc clutch Where are you located? I have a spare transmission I might be willing to part with. It has the big castle nut on the input shaft indicating that it was from a multi-disc. I've heard that with a few modifications it can be be used with my single-disc...but, I may be better off to get one that doesn't need modifications. __________________ Style beats speed any day, and with a lot fewer tickets.

01-16-2017, 01:29 PM	#3
Ron in Quincy Senior Member Join Date: May 2010 Location: Quincy, CA. Posts: 1,708	Re: Multi disc clutch Sponsored Links (Register now to hide all advertisements) I have all the modified parts, AR Bell Housing, AR Transmission, AR Flywheel Cover, and cut down regular Flywheel that weights 37 pounds including ring gear. I made the same conversion on my very early Sport Coupe. When installed the conversion, from outside appearance, you would think the "A" has a multi-disc clutch. The parts would be too heavy to ship so they would have to be picked up at my home in Northern California. The cost for the parts is $1,025.00. If interested, send me a PM. I have pictures I can send you of the modified parts. Note: the Flywheel has been balanced and is tapped for a V8 pressure plate; only thing required is the pressure plate and clutch disc.