The Ford Barn

Keith True · 08-07-2022, 07:25 PM

Is anybody here familiar enough with the Graham Paige to sell me what is used for the serial number?It is a 1929,model 610,111 inch wheelbase,I first tried some Graham people,8 people,8 different answers as to the location.And,every one was sure they were right and the others were wrong.

nkaminar · 08-07-2022, 07:35 PM

https://www.grahamownersclub.com/ide...my-graham.html
https://forums.aaca.org/topic/121271...serial-number/

Keith True · 08-07-2022, 07:57 PM

I have that chart,but it doesn't give the location.The guy that reported the number as on a tag riveted to the floor,behind the seat is incorrect.That is the BODY number,much like a Briggs body number on an A.I have been told it is the engine number,stamped on the LF corner of the block.Also been told it is stamped in the front crossmember under the radiator.Then stamped into the LF frame rail under the fender, Stamped on a tag under one front fender,but have been told left and right.Some say on the right rear frame rail.And,right side door sill,and one said the firewall.

fundytides · 08-08-2022, 07:30 AM

Take this for what it's worth. I have a Hollander Interchange Manual 16th edition (1949-50) . In the serial number section, it states that the serial number for Graham Paige cars is "on plate on body inside right rear door or on motor # plate on block". Some of the other locations that you have been given are for 1930 and up Grahams according to the Hollander. Good luck!

ronn · 08-08-2022, 10:17 AM

Sponsored Links (Register now to hide all advertisements)

in 29 Keith, it should be the motor number. no other.

I have thousands of titles and they all did it that way pre 1934 ish.

08-07-2022, 07:25 PM	#1
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 3,007	OT Graham Paige Is anybody here familiar enough with the Graham Paige to sell me what is used for the serial number?It is a 1929,model 610,111 inch wheelbase,I first tried some Graham people,8 people,8 different answers as to the location.And,every one was sure they were right and the others were wrong.

08-07-2022, 07:35 PM	#2
nkaminar Senior Member Join Date: Jan 2012 Location: Western North Carolina Posts: 3,988	Re: OT Graham Paige https://www.grahamownersclub.com/ide...my-graham.html https://forums.aaca.org/topic/121271...serial-number/ __________________ A is for apple, green as the sky. Step on the gas, for tomorrow I die. Forget the brakes, they really don't work. The clutch always sticks, and starts with a jerk. My car grows red hair, and flies through the air. Driving's a blast, a blast from the past.

08-07-2022, 07:57 PM	#3
Keith True Senior Member Join Date: May 2010 Location: Epping N.H. Posts: 3,007	Re: OT Graham Paige I have that chart,but it doesn't give the location.The guy that reported the number as on a tag riveted to the floor,behind the seat is incorrect.That is the BODY number,much like a Briggs body number on an A.I have been told it is the engine number,stamped on the LF corner of the block.Also been told it is stamped in the front crossmember under the radiator.Then stamped into the LF frame rail under the fender, Stamped on a tag under one front fender,but have been told left and right.Some say on the right rear frame rail.And,right side door sill,and one said the firewall.

08-08-2022, 07:30 AM	#4
fundytides Senior Member Join Date: Feb 2013 Location: New Brunswick, Canada Posts: 480	Re: OT Graham Paige Take this for what it's worth. I have a Hollander Interchange Manual 16th edition (1949-50) . In the serial number section, it states that the serial number for Graham Paige cars is "on plate on body inside right rear door or on motor # plate on block". Some of the other locations that you have been given are for 1930 and up Grahams according to the Hollander. Good luck!

08-08-2022, 10:17 AM	#5
ronn Senior Member Join Date: Feb 2011 Location: NNNNNNNNJJJJJJJJJJ Posts: 6,821	Re: OT Graham Paige Sponsored Links (Register now to hide all advertisements) in 29 Keith, it should be the motor number. no other. I have thousands of titles and they all did it that way pre 1934 ish.