The Ford Barn

Forever In Stone · 07-06-2012, 05:47 PM

I've just changed my points distributor to a Mallory uni-lite pointless ignition. The only way I could get it to fire was to turn the distributor 180 degrees.
Which makes the crap cap upside down. Meaning the the coil wire is on the bottom at the crank pully. Is this the correct install? Your thoughts are welcome, Alan

Henry/Kokomo · 07-06-2012, 06:10 PM

Sponsored Links (Register now to hide all advertisements)

You might want to post this on the appropriate forum. You got into the swap section by mistake

07-06-2012, 05:47 PM	#1
Forever In Stone Junior Member Join Date: Oct 2011 Location: Vestal, NY 13850 Posts: 15	Mallory Distributor? City: Vestal State: New York I've just changed my points distributor to a Mallory uni-lite pointless ignition. The only way I could get it to fire was to turn the distributor 180 degrees. Which makes the crap cap upside down. Meaning the the coil wire is on the bottom at the crank pully. Is this the correct install? Your thoughts are welcome, Alan

07-06-2012, 06:10 PM	#2
Henry/Kokomo Senior Member Join Date: May 2010 Location: Kokomo, Indiana Posts: 1,731	Re: Mallory Distributor? Sponsored Links (Register now to hide all advertisements) You might want to post this on the appropriate forum. You got into the swap section by mistake