The Ford Barn

rkatk · 10-26-2011, 10:52 AM

I am in need of a patch panel for the right front fender of my 29. See the attached photo for the area in red on the fender. I need a section about 4-6 inched long along the bead and 6" or so up the crown of the fender.
Thanks,
Randy

rkatk · 10-27-2011, 10:52 AM

Anyone with a junky fender to cut up?

rkatk · 10-28-2011, 11:32 AM

Anyone?

Bill in NJ · 10-29-2011, 01:06 PM

Are the 1930 31 the same??

Tom Bullock · 10-29-2011, 10:07 PM

I have a bad fender Joyce is currently for yard art. I will take look tomorrow (dark here in CA) and let you know if I can help. Tom Bullock

Tom Bullock · 10-31-2011, 12:12 AM

Sponsored Links (Register now to hide all advertisements)

Might have what you need. Rusty. Starting at the fender brace hole, give me measurements over the curves of the fender of piece wanted. [email protected]

BRENT in 10-uh-C · 10-31-2011, 12:40 PM

Randy, if options from the others above don't pan out, let me know I'll make you one from scratch for $50 + shipping.

rkatk · 11-01-2011, 01:40 PM

Tom,
Measuring from the fender bolt hole down the curve of the fender towards the running board the first cut would be 6 ½” and then continue down the curve towards the running board 6” more for the second cut. Then for the depth, about 6” up curve of the crown of the fender.
Thanks,
Randy Kiespert

rkatk · 11-04-2011, 04:53 PM

bump

rkatk · 11-14-2011, 04:43 PM

Still looking

10-27-2011, 10:52 AM	#2
rkatk Senior Member Join Date: Jul 2011 Posts: 146	Re: Wanted: 29 front fender patch panel Anyone with a junky fender to cut up?

10-28-2011, 11:32 AM	#3
rkatk Senior Member Join Date: Jul 2011 Posts: 146	Re: Wanted: 29 front fender patch panel Anyone?

10-29-2011, 01:06 PM	#4
Bill in NJ Senior Member Join Date: May 2010 Posts: 1,159	Re: Wanted: 29 front fender patch panel Are the 1930 31 the same??

10-29-2011, 10:07 PM	#5
Tom Bullock Junior Member Join Date: May 2010 Posts: 4	Re: Wanted: 29 front fender patch panel I have a bad fender Joyce is currently for yard art. I will take look tomorrow (dark here in CA) and let you know if I can help. Tom Bullock

10-31-2011, 12:12 AM	#6
Tom Bullock Junior Member Join Date: May 2010 Posts: 4	Re: Wanted: 29 front fender patch panel Sponsored Links (Register now to hide all advertisements) Might have what you need. Rusty. Starting at the fender brace hole, give me measurements over the curves of the fender of piece wanted. [email protected]

10-31-2011, 12:40 PM	#7
BRENT in 10-uh-C Senior Member Join Date: May 2010 Location: Eastern Tennessee Posts: 11,520	Re: Wanted: 29 front fender patch panel Randy, if options from the others above don't pan out, let me know I'll make you one from scratch for $50 + shipping. __________________ . BRENT in 10-uh-C . www.model-a-ford.com ...(...Finally Updated!! ) .

11-01-2011, 01:40 PM	#8
rkatk Senior Member Join Date: Jul 2011 Posts: 146	Re: Wanted: 29 front fender patch panel Tom, Measuring from the fender bolt hole down the curve of the fender towards the running board the first cut would be 6 ½” and then continue down the curve towards the running board 6” more for the second cut. Then for the depth, about 6” up curve of the crown of the fender. Thanks, Randy Kiespert

11-04-2011, 04:53 PM	#9
rkatk Senior Member Join Date: Jul 2011 Posts: 146	Re: Wanted: 29 front fender patch panel bump

11-14-2011, 04:43 PM	#10
rkatk Senior Member Join Date: Jul 2011 Posts: 146	Re: Wanted: 29 front fender patch panel Still looking