Go Back   The Ford Barn > General Discussion > Early V8 (1932-53)

Sponsored Links (Register now to hide all advertisements)

Reply
 
Thread Tools Display Modes
Old 10-16-2023, 05:50 PM   #1
48fordconv
Senior Member
 
Join Date: May 2010
Location: Portland, ME
Posts: 132
Default 48 Ford how much play on rear driveshaft yoke

I have a 48 Ford that converted to open driveshaft. How much play up and down on the yoke, Thanks Steve
48fordconv is offline   Reply With Quote
Old 10-16-2023, 07:17 PM   #2
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,115
Default Re: 48 Ford how much play on rear driveshaft yoke

Quote:
Originally Posted by 48fordconv View Post
I have a 48 Ford that converted to open driveshaft. How much play up and down on the yoke, Thanks Steve
Steve ..... Let's see if I understand your question. Are you talking about grabbing the yoke and physically moving the yoke (and the pinion shaft) literally up & down in relation to the banjo housing? If that's what you're asking, and that's what it's actually doing, that's bad news! That shouldn't have any up & down play.

Coop

.
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Sponsored Links (Register now to hide all advertisements)
Old 10-17-2023, 08:08 AM   #3
48fordconv
Senior Member
 
Join Date: May 2010
Location: Portland, ME
Posts: 132
Default Re: 48 Ford how much play on rear driveshaft yoke

V8COOPMAN

What do you think is wrong ? Noticed grease seal was leaking
48fordconv is offline   Reply With Quote
Old 10-17-2023, 10:41 AM   #4
Mart
Senior Member
 
Mart's Avatar
 
Join Date: May 2010
Location: Solihull, England.
Posts: 8,755
Default Re: 48 Ford how much play on rear driveshaft yoke

Lock nuts have probably worked loose. There is a specific tightening method for these. They need to be not too tight in clamping down, but tightly locked together.
Mart is offline   Reply With Quote
Old 10-17-2023, 05:15 PM   #5
48fordconv
Senior Member
 
Join Date: May 2010
Location: Portland, ME
Posts: 132
Default Re: 48 Ford how much play on rear driveshaft yoke

Mart, Which lock nuts.
48fordconv is offline   Reply With Quote
Old 10-17-2023, 06:18 PM   #6
Brian
Senior Member
 
Brian's Avatar
 
Join Date: May 2010
Location: Masterton, New Zealand
Posts: 3,834
Default Re: 48 Ford how much play on rear driveshaft yoke

Sponsored Links (Register now to hide all advertisements)
Which yoke? Out back of the transmission- the sliding yoke?
__________________
Unfortunately, two half wits don't make a whole wit!
Brian is offline   Reply With Quote
Old 10-17-2023, 06:34 PM   #7
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,115
Default Re: 48 Ford how much play on rear driveshaft yoke

Quote:
Originally Posted by 48fordconv View Post
Mart, Which lock nuts.

Your OPEN DRIVE should look like this first picture. Once you remove the SIX BOLTS and the cover where the pinion goes into the banjo housing, you should see the two lock nuts as seen in the 2nd picture below.





The two lock nuts seen in this picture. They lock against each other with a French lock between the two nuts.




Coop

.
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Old 10-18-2023, 09:39 AM   #8
48fordconv
Senior Member
 
Join Date: May 2010
Location: Portland, ME
Posts: 132
Default Re: 48 Ford how much play on rear driveshaft yoke

Brian, the yoke coming out of rear end with open drivesalf
48fordconv is offline   Reply With Quote
Old 10-18-2023, 10:33 AM   #9
jimvette59
Senior Member
 
jimvette59's Avatar
 
Join Date: Jun 2010
Location: Perry OH
Posts: 1,330
Default Re: 48 Ford how much play on rear driveshaft yoke

You should have NO play up and down or in and out.
jimvette59 is offline   Reply With Quote
Old 10-21-2023, 08:17 AM   #10
Rodrelic
Senior Member
 
Join Date: Mar 2018
Location: Florida panhandle
Posts: 194
Default Re: 48 Ford how much play on rear driveshaft yoke

Drag should be something like 1.7 in # I thought, rather than toggle something up I elected to do it by “ feels good” that is enclosed, but same thing. If it feels gritty, I would pull it out & change cup & cones. Really not good if bearings spun & wallowed out housing.
Rodrelic is offline   Reply With Quote
Old 10-21-2023, 01:38 PM   #11
V8COOPMAN
Senior Member
 
V8COOPMAN's Avatar
 
Join Date: May 2010
Location: East Shore of LAKE HOUSTON
Posts: 11,115
Default Re: 48 Ford how much play on rear driveshaft yoke

Quote:
Originally Posted by Rodrelic View Post
Really not good if bearings spun & wallowed out housing.

Really not good if pinion was able to move up & down and left & right while driving against the ring gear and totally eating the ring gear up! Ring and pinion are probably junk.


Coop

.
__________________
Click Links Below __


'35-'36 W/8BA & MECHANICAL FAN


T5 W/TORQUE TUBE
V8COOPMAN is offline   Reply With Quote
Reply


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Sponsored Links (Register now to hide all advertisements)


All times are GMT -5. The time now is 04:27 PM.